Bobcat S70 Construction Attachments

Augers

Auger 10

Loader Model ............................ Bobcat S70
Model ............................ Auger 10
Part Number ............................ 6808799
Auger Bit Type ............................ Round
Digging Depth, in (mm) ............................ 58 (1473)
Maximum Speed, rpm ............................ 90
Maximum Rated Flow, gpm (lpm) ............................ 15.0 (57.0)
Working Flow ............................ Standard
Weight, lbs (kg) ............................ 150 (69)

Angle Brooms

48" Angle Broom

Loader Model ............................ Bobcat S70
Part Number ............................ 6907000
Sweeping Width, in (mm) ............................ 48 (1220)
Sweeping Width Fully Angled, in (mm) ............................ 41.5 (1055) at 30 deg
Brush Diameter, in (mm) ............................ 21.3 (543)
Number of Bristle Sections (zigzag/straight) ............................ 23/4
Maximum Angle, deg ............................ ±30 (manual)
Flow Range, gpm (lpm) ............................ 8.0-13.2 (30-50)
Working Flow ............................ Standard

Sweepers

44" Sweeper

Loader Model ............................ Bobcat S70
Part Number ............................ 7138898
Sweep Width, in (mm) ............................ 44 (1118)
Overall Width, in (mm) ............................ 48.3 (1227)
Bucket Capacity (Heaped), cu.ft (cu.m) ............................ 6.6 (0.19)
Broom Diameter, in (mm) ............................ 21.4 (544)
Bristle Material ............................ Polypropylene
Number of Sections ............................ 21
Speed at 15 gpm (57 lpm), rpm ............................ 185
Working Flow ............................ Standard
Weight, lbs (kg) ............................ 555 (252)

Breakers

Breaker HB580

Loader Model ............................ Bobcat S70
Breaker Model ............................ HB580
Part Number ............................ 7113418
Flow Range, gpm (lpm) ............................ 4.5-9.2 (17-35)
Blow Rate (Soft Ground), beats/min ............................ 1220
Blow Rate (Hard Ground), beats/min ............................ 1350
Operating Pressure, psi (bar) ............................ 1740 (120)
Working Flow ............................ Standard
Weight, lbs (kg) ............................ 244 (111)

Breaker HB680

Loader Model ............................ Bobcat S70
Breaker Model ............................ HB680
Part Number ............................ 7113419
Flow Range, gpm (lpm) ............................ 6.6-13.2 (25-50)
Blow Rate (Soft Ground), beats/min ............................ 1220
Blow Rate (Hard Ground), beats/min ............................ 1340
Operating Pressure, psi (bar) ............................ 1740 (120)
Working Flow ............................ Standard
Overall Length, in (mm) ............................ 44.7 (1136)
Tool Length, in (mm) ............................ 13 (330)
Tool Diameter, in (mm) ............................ 2.2 (55.1)
Lower Cradle Diameter, in (mm) ............................ 7.3 (186)
Weight, lbs (kg) ............................ 330 (150)

Breaker NB140

Loader Model ............................ Bobcat S70
Breaker Model ............................ NB140
Part Number ............................ 7355666
Flow Range, gpm (lpm) ............................ 7-13 (30-50)
Blow Rate, beats/min ............................ 1022
Working Thickness, in (mm) ............................ 1-5 (102-304)
Overall Length, in (mm) ............................ 43.1 (1094)
Tool Length, in (mm) ............................ 12.5 (319)
Tool Diameter, in (mm) ............................ 2.2 (55)
Weight, lbs (kg) ............................ 463 (210)

Grinders

Stump Grinder SG30

Loader Model ............................ Bobcat S70
Model ............................ Stump Grinder SG30
Part Number ............................ 7100641
Transport Width, in (mm) ............................ 36 (914)
Overall Length, in (mm) ............................ 46.3 (1175)
Overall Height, in (mm) ............................ 33.5 (850)
Wheel Diameter w/Teeth, in (mm) ............................ 18 (457)
Tip Speed, ft/min (m/min) ............................ 3109-4691 (948-1430)
Number of Teeth ............................ 16
Cutting Height, in (mm) ............................ 11 (280)
Cutting Depth, in (mm) ............................ 11 (280)
Swing Arc, degrees ............................ 90
Hydraulic Flow, gpm (lpm) ............................ 10-14 (38-53)
Working Flow ............................ Standard
Weight, lbs (kg) ............................ 460 (209)