Case 450CT Track Loader Maintenance Data

The Case 450CT compact track loader is powered by 274 cu.in (4.5L) Case 445T/M2 four-cylinder direct injection turbocharged diesel engine with a rated power of 89 hp (66 kW). The Case 450CT is equipped with a two-speed hydrostatic transmission, planetary single reduction, 17.7" (450 mm) rubber tracks with steel inserts, and radial-lift loader boom. The hydraulic system has a pump with fluid flow rate of 21.9 gpm (83 lpm). The hydraulic pressure is 3050 psi (210 bar). The track loader has a rated operating capacity of 2700 lbs (1225 kg) and tipping load of 7716 lbs (3500 kg). The lift height is 124.5" (3160 mm) to hinge pin, and dump height is 94.5" (2400 mm).

Refill Capacities

Engine Oil Capacity, gal (L) .................. 3.2 (12.0)
Engine Coolant Capacity, gal (L) .................. 4.5 (17.0)
Hydraulic Reservoir Capacity, gal (L) .................. 6.5 (24.5)
Hydraulic System Capacity, gal (L) .................. 17.0 (64.3)
Final Drive Gearbox Capacity, qts (L) .................. 1.4 (1.3)
Fuel Tank Capacity, gal (L) .................. 20.7 (78.3)

Recommended Oil and Fluid

Engine Oil Type .................. SAE 15W-40. API Service Category CH or higher
Engine Coolant Type .................. Extended-Life Coolant/Antifreeze
Hydraulic Fluid Type .................. SAE 10W-30. API Service Category CH or higher
Final Drive Gearbox Oil Type .................. Gearlube GL-3/GL-5, SAE 85W-140

Service Intervals

Lubricate Cylinder Pivot Points .................. Every 50 Hours
Check Hydraulic Fluid Level .................. Every 50 Hours
Check Tracks Tension .................. Every 50 Hours
Check Track Sprocket Bolts Torque .................. Every 50 Hours
Check Battery Connections .................. Every 100 Hours
Check Alternator/Fan Belt Tension .................. Every 100 Hours
Clean Primary Air Filter .................. Every 250 Hours
Change Engine Oil .................. Every 500 Hours
Replace Engine Oil Filter .................. Every 500 Hours
Replace Fuel Filter Element .................. Every 500 Hours
Replace Hydraulic Filter Element .................. Every 500 Hours
Change Final Drive Oil .................. Every 500 Hours
Change Hydraulic System Fluid .................. Every 1000 Hours
Replace Primary Air Filter .................. Every 1000 Hours
Replace Secondary Air Filter .................. Every 1000 Hours
Change Engine Coolant .................. Every 2000 Hours

Replacement Parts

Engine Oil Filter. Part Number .................. 87803261
Engine Fuel Filter. Part Number .................. 87803194
In-Line Fuel Filter. Part Number .................. 87548612, D139225
Primary Engine Air Filter. Part Number .................. 87037984
Secondary Engine Air Filter. Part Number .................. 87037985
Hydraulic Oil Filter. Part Number .................. 87430661, 87010593 (Element)
Hydraulic Strainer. Part Number .................. 189310A1

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

S100