________________________________________________________________________________

Case IH 8940 Technical Data

Case 8940 Engine Specifications

Engine Model - CDC
Engine Type - Six-cylinder, direct injection, turbocharged diesel
Number of Cylinders - 6
Displacement, cu in (L) - 504,5 (8,3)
Engine Bore, in (mm) - 4,49 (114,0)
Engine Stroke, in (mm) - 5,32 (135,0)
Aspiration - Turbocharged
Rated Engine Power, hp (kW) - 234,0 (174,5)
Rated Engine Speed, rpm - 2200
Torque Speed, rpm - 1100
Maximum Torque, Nm (ft-lbs) - 993 (735)
Compression - 16.5:1
Firing Order - 1-5-3-6-2-4
Fuel System - Mechanical injection
Air cleaner - Dual dry element
Fuel Tank Capacity, gal (L) - 117,0 (443,0)
Oil Capacity, qts (L) - 22,0 (21,0)
Coolant Capacity, qts (L) - 31,0 (29,3)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 110

Case IH 8940 Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 205,0 (152,9)
PTO Speeds, rpm - 1000
PTO Clutch - Electro-hydraulic wet disc

Transmission Configuration

Transmission Type - 18F/4R, Full power shift
Number of Forward Speeds - 18
Number of Reverse Speeds - 4
Clutch - Hydraulic wet disc
Transmission Type - 24F/6R, Powershift with creeper
Number of Forward Speeds - 24
Number of Reverse Speeds - 6
Maximum Speed (Forward), mph (kph) - 20,4 (32,8)
Maximum Speed (Reverse), mph (kph) - 7,4 (11,9)
Maximum Forward Speed (Creeper), mph (kph) - 2,2 (3,5)
Maximum Reverse Speed (Creeper), mph (kph) - 1,8 (2,9)
Service Brake - Differential hydraulic wet disc

Case 8940 Wheels and Tires

Drive Wheels - 2WD/4WD
Steering Configuration - Front Steer
Steering System - Hydrostatic power
Front Tire Size - 14L-16.1
Rear Tire Size - 18.4-R42

Case IH 8940 Hydraulics and Hitch

Hydraulic System Type - Closed center pressure flow compensated (PFC)
Implement Pump Flow, gpm (Lpm) - 29,0 (109,3)
Hydraulic Pressure, Bar (psi) - 152 (2200)
Hydraulic Capacity, gal (L) - 45,5 (173,0)
Number of Standard Remote Valves - 2/4
3-Point Hitch Category - 3/3N
Draft Sensing or Lift Control - Electronic lower link draft sensing
Standard Lift Capacity at lift pin, lb (kg) - 13750 (6240)
Optional Lift Capacity at lift pin, lb (kg) - 16000 (7260)

Case 8940 Dimensions and Weight

Wheelbase, in (mm) - 118,3 (3000)
Ground Clearance (2WD), in (mm) - 22,8 (570)
Ground Clearance (4WD), in (mm) - 17,6 (440)
Front Tread, in (mm) - 60-88 (1520-2230)
Rear Tread, in (mm) - 4x114 (101x2895)
Weight (2WD), lb (kg) - 15825 (7180)
Weight (4WD), lb (kg) - 16845 (7640)
Weight (Operating) - 18170 (8240)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270