Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

Case IH Farmall 50A Tractor Specs

Classification - Utility tractor

CaseIH Farmall 50A Engine Specifications

Engine Make - Case IH FPT
Engine Model - 2.2 L
Number of Cylinders - 3
Advertised Engine Power, Rated, hp (kW) - 53 (39.5 )
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 17.1 (65)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Displacement, cu in (L) - 135.9 (2.23)
Engine Bore, in (mm) - 3.70 (94)
Engine Stroke, in (mm) - 4.21 (107)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Wastegate turbocharged
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Exhaust Gas Recirculation (EGR) - Internal EGR
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal - Downswept std; Vertical opt
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12

Case IH Farmall 50A Power Take Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 46 (34)
PTO Speeds, rpm - 540 std; 540/540E opt.
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission Configuration

Manufacturer's Description - 8Fx8R Mechanical Shuttle
Transmission Type - Synchro-shuttle
Number of Forward / Reverse Speeds - 8F / 8R
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Case International 50A Tractor Wheel Configuration

Drive Wheels - 2WD / 4WD
Steering Configuration - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle

Suspended Front Axle Available - No

Brakes

Service Brake Type - Wet disc

Case IH Farmall 50A Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Dual gear
Implement Pump Flow, gpm (Lpm) - 11.9 (45)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 std.; 2nd opt.

Case International 50A 3-Point Hitch Features

3-Point Hitch Category - Category 2 / 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Draft and Position Control
Draft Link Ends Telescopic - Standard
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,701 (1225) OECD

Wheelbase

Wheelbase, MFD/4WD or Track, in (mm) - 97.6 (2478)

Case IH Farmall 50A Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 129.5 (3290)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 134 (3404)
Height to Top of ROPS raised, in (mm) - 92.7 (2365)
Overall Width, with standard wheels or tracks, in (mm) - 67.5 (1714)
Weight, 2WD w/ROPS, lb (kg) - 3,770 (1710) preliminary
Weight, MFD/4WD w/ROPS, lb (kg) - 4,079 (1850) preliminary
Weight, Total allowable, w/maximum ballast, lb (kg) - 4,871 (2210) preliminary

Tire Size

Front Tire Size, 2WD - 7.50x16, 6PR
Front Tire Size orTrack Width, MFD/4WD or Track - 8.3x24, 6PR
Rear Tire Size or Track Width - 13.6x28, 8PR

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________