Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

Case IH Farmall 50C Tractor Specs

Classification - Compact Utility tractor

Case IH Farmall 50 C Engine Specifications

Engine Model - IHI Shibaura N844L-F-34
Number of Cylinders - 4
Advertised Engine Power, Rated, hp (kW) - 46 (34)
Maximum Engine Power, hp (kW) - 46 (34)
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 10.5 (40)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Displacement, cu in (L) - 135 (2.216)
Engine Bore, in (mm) - 3.307 (84)
Engine Stroke, in (mm) - 3.937 (100)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Natural
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - Tier 4B / Final
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 85

Power Take Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 37.3 / 35.4 (27.8 / 26.4)
PTO Speeds, rpm - 540
PTO operational Type - Independent

Case IH Farmall 50C Transmission Configuration

Manufacturer's Description - 16x16 Synchro-shuttle
Transmission Type - 4 gears synchro, 4 ranges non-synchro
Number of Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 17 (27.3)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Case International 50 Optional Transmission

Manufacturer's Description - 3-Range Hydrostatic
Transmission Type - Hydrostatic w/Cruise Control
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration: Front Steer

Case IH Farmall 50 C Tractor Rear Axle

Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

Case IH Farmall 50C Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Dual gear
Implement Pump Flow, gpm (Lpm) - 8.2 (31)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 or 2 optional

Case International 50 Tractor 3-Point Hitch Features

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,116 (960)
Standard Lift Capacity at lift pin, lb (kg) - 2,756 (1250)

Drawbar

Drawbar Description - Extendable

Wheelbase

Wheelbase, MFD/4WD, in (mm) - 73 (1854)

CaseIH Farmall 50 C Dimensions

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 129 (3277)
Height to Top of ROPS raised, in (mm) - 96.5 (2451)
Overall Width, with standard wheels or tracks, in (mm) - 69 (1753)

Weight

Weight, MFD/4WD w/ROPS, lb (kg) - 3,945 (1789)

Tires

Front Tire Size orTrack Width, MFD/4WD or Track - 12x16.5, 6PR R4
Rear Tire Size or Track Width - 17.5Lx24, 6PR R4

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________