________________________________________________________________________________

Case IH Puma 160 Specs

Case IH Puma 160 Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 160 (118)
Maximum Engine Power, hp (kW) - 203 (149)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 43 (32)
Fuel Tank capacity, gal (L) - 87 (330)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 12.7 (48)
Engine Make - Case IH FPT
Engine Model - 6.7 L
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR w/ DEF
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - BorgWarner Visctronic
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Puma 160 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 135 (101)
PTO Speeds, rpm - 540 / 1000
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission

Manufacturer's Description - 18x6 Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Optional
Shuttle (Forward-Reverse) Available - Yes

Optional Transmission

Manufacturer's Description - 19x6 Hi-Speed Gear, 25 mph (40kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Manufacturer's Description - 19x6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Case IH Puma 160 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Front Tire Size orTrack Width, MFD/4WD or Track - 14.9 R30, R1W
Rear Tire Size or Track Width - 18.4 R42, R1W
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 107.8 (2739) / 109.7 (2786) Suspended Axle

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Flange or bar
Axle Bar Diameter, in (mm) - 3.62 (92)
Suspended Front Axle Available - Optional
Service Brake Type - Wet disc

Puma 160 Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 26.5 (100)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 std; 3 or 4 opt.

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 2 / 3N
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 7,900 (3584)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,200 (4173)
Drawbar Description - Swinging

Case IH Puma 160 Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 179.5 (4559)
Height to Top of Cab, in (mm) - 118.3 (3005)
Height to Top of ROPS raised, in (mm) - No open ROPS
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 13,900 (6305)
Weight, Total allowable, w/maximum ballast, lb (kg) - 23,149 (10500)