________________________________________________________________________________

Case IH Puma 215 Specs

Puma 215 Engine Specifications

Engine Make - Case IH FPT
Engine Model - 6.7 L
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 215 (158)
Maximum Engine Power, hp (kW) - 260 (191)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 45 (33)
Fuel Tank capacity, gal (L) - 104 (395)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 13.2 (50)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR w/ DEF
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - BorgWarner Visctronic
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Case IH Puma 215 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 180 (134)
PTO Speeds, rpm - 540 / 1000 / 1000E
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission

Manufacturer's Description - 18 x 6 Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Yes
Shuttle (Forward-Reverse) Available - Yes

Optional Transmission

Manufacturer's Description - 19F x 6R, 25 mph (40 kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Manufacturer's Description - 19F x 6R, 30 mph (50 kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Puma 215 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 113.6 (2885)
Front Tire Size orTrack Width, MFD/4WD or Track - 16.9 R30, R1W
Rear Tire Size or Track Width - 20.8 R42 or 520/85 R42 R1W

Axles and Brakes

Final Drive Location and Description - Inboard Planetary
Axle Output End, Flange or Bar - Bar
Axle Bar Diameter, in (mm) - 4.125 (105)
Suspended Front Axle Available - Optional
Service Brake Type - Wet disc

Case IH Puma 215 Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 32 (120)
Optional Pump Flow, gpm (Lpm) - 40 (150)
Number of Standard Remote Valves - 3 std; 4 or 5 opt.

3-Point Hitch

3-Point Hitch Category - Category 2 / 3N
Optional Hitch Category - No option
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 10,200 (4627) w/90 mm cyl.
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 15,200 (6895) w/110 mm cyl.
Drawbar Description - Category 3, Swinging

Puma 215 Dimensions and Weight

Height to Top of ROPS raised, in (mm) - No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) - No open ROPS
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 15,900 (7212)
Weight, Total allowable, w/maximum ballast, lb (kg) - 28,660 (13000)

Case IH L770 Loader

Height (to pin) - 178 inches (452 cm)
Clearance, dumped bucket - 140 inches (355 cm)
Dump reach - 29 inches (73 cm)
Dump angle - 55
Reach at ground - 113 inches (287 cm)
Rollback angle - 43
Breakout force (at pin) - 6650 lbs (3016 kg)
Breakout force (at 800mm) - 5800 lbs (2630 kg)
Lift to full height (at pin) - 5450 lbs (2472 kg)
Lift to full height (at 800mm) - 4900 lbs (2222 kg)