________________________________________________________________________________

Case IH Puma 225 Specs

Case IH Puma 225 Engine Specifications

Engine Model - Case IH FPT 6.7 L
Number of Cylinders - 6
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Advertised Engine Power, Rated, hp (kW) - 225 (162)
Maximum Engine Power, hp (kW) - 260 (191)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 40 (29)
Fuel Tank capacity, gal (L) - 103 (390)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - 12.7 (48)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air-to-air aftercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - SCR w/ DEF
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - CUC standard
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - BorgWarner Visctronic std; Reversible opt.
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 150 Std / 200 Opt

Puma 225 Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 190 (142)
PTO Speeds, rpm - 540 / 1000 FPS; 1000 / 1000E CVT
PTO operational Type (Independent; Live; Continuous) - Independent

Basic Transmission

Manufacturer's Description - 18 x 6 Full Powershift
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range Available - Optional 29F x 12R
Shuttle (Forward-Reverse) Available - Yes

Optional Transmission

Manufacturer's Description - 40 or 50 kph ECO CVT
Transmission Type - Continuously Variable (CVT)
Number of Forward / Reverse Speeds - Infinite, 4 ranges

Manufacturer's Description - 19 x 6 Hi-Speed Gear, 30 mph (50kph)
Transmission Type - Full powershift
Number of Forward / Reverse Speeds - 19F / 6R

Case IH Puma 225 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 113.6 (2885)
Front Tire Size orTrack Width, MFD/4WD or Track - 420/85 (16.9) R30
Rear Tire Size or Track Width - 520/85 (20.8) R42

Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Axle Output End, Flange or Bar - Bar
Axle Bar Diameter, in (mm) - 4.13 (105)
Suspended Front Axle Available - Optional
Service Brake Type - Wet disc

Puma 225 Hydraulic System

Hydraulic System Type - Closed Center, Pressure Flow Compensated (PFC)
Main Hydraulic Pump Type - Variable Displacement
Implement Pump Flow, gpm (Lpm) - 31.7 (120) FPS; 39.6 (150) CVT
Optional Pump Flow, gpm (Lpm) - 39.6 (150) FPS; 44.9 (170) CVT
Number of Standard Remote Valves - 3 std; 4th & 5th opt.

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 2 / 3
Draft Sensing or Lift Control - Electronic Draft Control (EDC)
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 9,450 (4286)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 15,000 (6804) w/110 mm cyl.
Drawbar Description - Swinging

Case IH Puma 225 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Overall Width, with standard wheels or tracks, in (mm) - 112 (2845) bar axle ends
Weight, MFD/4WD w/ROPS, lb (kg) - No open ROPS
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 15,900 (7212) FPS; 16,800 (7620) CVT
Weight, Total allowable, w/maximum ballast, lb (kg) - 28,660 (13000)