Backhoe Loaders and Industrial Tractors Technical Specifications

________________________________________________________________________________

Caterpillar 442D Backhoe Loader

Caterpillar 442D Engine

Engine Model ............... Caterpillar 3054 DIT
Engine Type ............... Four-cylinder, direct injection turbocharged diesel
Number of Cylinders ............... 4, In-Line
Displacement, cu in (L) ............... 268 (4.40)
Engine Bore, in (mm) ............... 4.13 (105.0)
Engine Stroke, in (mm) ............... 5.00 (127.0)
Aspiration ............... Turbocharged
Maximum Engine Power, hp (kW) ............... 98.0 (73.0)
Rated Engine Power, hp (kW) ............... 94.0 (70.0)
Rated Engine Speed, rpm ............... 2200
Compression ............... 16.2:1
Emission ............... Tier 2
Fuel System ............... Direct Injection
Rotation ............... Counterclockwise
Air Cleaner ............... Dry-type axial seal
Fuel Tank Capacity, gal (L) ............... 34.0 (128.0)
Oil Capacity, qts (L) ............... 7.9 (7.3)
Coolant Capacity, qts (L) ............... 17.0 (15.9)
Electrical System Rating, Volts ............... 12
Battery Rating ............... 700 CCA

Transmission Configuration

Transmission Type (Std) ............... Power Shuttle
Gearbox Type ............... 4F/4R, Full synchromesh
Number of Forward Gears ............... 4
Number of Reverse Gears ............... 4
Torque Converter ............... Single-stage
Torque Converter Ratio ............... 2.64:1
Oil Capacity, qts (L) ............... 19.1 (18.0)
Maximum Forward Speed, mph (kph) ............... 19.8 (31.8)
Maximum Reverse Speed, mph (kph) ............... 19.8 (31.8)

Transmission Type (Opt) ............... 5F/3R, Auto Shift
Number of Forward Gears ............... 5
Number of Reverse Gears ............... 3
Torque Converter ............... Single-stage
Oil Capacity, qts (L) ............... 16.0 (15.0)
Maximum Forward Speed, mph (kph) ............... 18.3 (29.4)
Maximum Reverse Speed, mph (kph) ............... 13.3 (21.4)

Cat 442D Hydraulic System

Hydraulic System Type ............... Closed center load sensing
Hydraulic Pump Type ............... Variable displacement, axial piston
Hydraulic Pump Flow, gpm (Lpm) ............... 43.0 (163.0)
Hydraulic Pressure, Bar (psi) ............... 228 (3300)
Hydraulic System Capacity, gal (L) ............... 21.0 (79.0)
Valves Type ............... Pressure-compensated

Wheels and Tires

Drive Wheels ............... 4WD 4x4
Steering Configuration ............... All Wheel Steer (AWS)
Steering System ............... Full hydrostatic steering with 3 modes
Steering Modes ............... Two wheel steer, circle steer, and crab steer
Steering Cylinder ............... Two, Double-acting (front and rear)
Steering Cylinder Bore (Front Wheels), in (mm) ............... 2.85 (72)
Steering Cylinder Stroke (Front Wheels), in (mm) ............... 8.3 (210)
Steering Cylinder Rod Diameter (Front Wheels), in (mm) ............... 1.50 (38)
Steering Cylinder Bore (Rear Wheels), in (mm) ............... 3.16 (80)
Steering Cylinder Stroke (Rear Wheels), in (mm) ............... 4.11 (104)
Steering Cylinder Rod Diameter (Rear Wheels), in (mm) ............... 1.58 (40)
Front Tire Size ............... 12.5/80x18 10PR
Front Tire Size ............... 16.9x28 12PR
Front Tread, in (mm) ............... 75.7 in (1914)
Rear Tread, in (mm) ............... 75.7 in (1914)

Dimensions and Weight

Wheelbase ............... 83 in (2100 mm)
Transport Length ............... 18 ft 11 in (5760 mm)
Overall Length, (Loader on ground) ............... 18 ft 9 in (5710 mm)
Transport Height ............... 12 ft 3 in (3740 mm)
Height (Cab) ............... 114.6 in (2900 mm)
Height (Exhaust) ............... 106.7 in (2700 mm)
Overall Width ............... 94.7 in (2396 mm)
Ground Clearance ............... 12.6 in (320 mm)
Turning Radius (Circle Steer) ............... 17 ft 2 in (5200 mm)
Turning Radius (Independent Rear Wheels) ............... 15 ft 7 in (4750 mm)
Weight ............... 17150 lbs (7800 kg)

Cat 442D Loader Specifications

Dimensions and Performance Data

Bucket Hinge Pin, Maximum Height ............... 10 ft 11 in (3321 mm)
Dump Angle at Full Height ............... 47 degrees
Dump Clearance at Full Height ............... 8 ft 7 in (2613 mm)
Dump Reach at Full Height ............... 30.2 in (764 mm)
Maximum Bucket Rollback at Ground Level ............... 40 degrees
Digging Depth ............... 3 in (77 mm)
Maximum Grading Angle ............... 111 degrees
Maximum Operating Height ............... 13 ft 9 in (4201 mm)
Lift Capacity at Maximum Height ............... 7470 lbs (3388 kg)
Breakout Force ............... 11280 lbs (5136 kg)
Loader Weight ............... 981 lbs (445kg)

Loader Bucket

Width, in (mm) ............... 89 (2260)
Height, in (mm) ............... 34.3 (871)
Length, in (mm) ............... 43.1 (1095)
Capacity (Struck), cu.ft (m3) ............... 29.1 (0.83)
Capacity (Heaped), cu.ft (m3) ............... 35.0 (1.00)
Weight, lb (kg) ............... 966 (483)

Cat 442D Backhoe Specifications

Dimensions and Performance Data (Standard Stick)

Maximum Digging Depth ............... 15 ft 11 in (4854 mm)
Digging Depth, 2 ft (610 mm) Flat Bottom ............... 15 ft 11 in (4850 mm)
Reach From Swing Pivot at Ground Line ............... 18 ft 6 in (5637 mm)
Loading Height ............... 12 ft 2 in (3712 mm)
Loading Reach ............... 5 ft 9 in (1742 mm)
Swing Arc ............... 180 degrees
Bucket Rotation ............... 205 degrees
Stabilizer Width ............... 7 ft 9 in (2360)
Digging Force (Bucket Cylinder) ............... 14710 lbs (6686 kg)
Digging Force (Crowd Cylinder) ............... 8590 lbs (3905 kg)
Total Side Shift Travel ............... 4 ft 2 in (1260)

Dimensions and Performance Data (Extendable Stick)

Maximum Digging Depth ............... 19 ft 4 in (5894 mm)
Digging Depth, 24 in (610 mm) Flat Bottom ............... 19 ft 3 in (5865 mm)
Reach From Swing Pivot at Ground Line ............... 21 ft 10 in (6664 mm)
Loading Height ............... 14 ft (4274 mm)
Loading Reach ............... 9 ft (2747 mm)
Swing Arc ............... 180 degrees
Bucket Rotation ............... 205 degrees
Stabilizer Width ............... 7 ft 9 in (2360)
Digging Force (Bucket Cylinder) ............... 14580 lbs (6627 kg)
Digging Force (Crowd Cylinder) ............... 6070 lbs (2760 kg)
Total Side Shift Travel ............... 4 ft 2 in (1260)

Standard Material Buckets

Width, in (mm) ............... 12 (305)
Capacity, cu.ft (m3) ............... 2.8 (0.078)
Number of Teeth ............... 3
Weight, lb (kg) ............... 213 (97)

Width, in (mm) ............... 18 (457)
Capacity, cu.ft (m3) ............... 4.2 (0.118)
Number of Teeth ............... 4
Weight, lb (kg) ............... 253 (115)

Width, in (mm) ............... 24 (610)
Capacity, cu.ft (m3) ............... 6.2 (0.175)
Number of Teeth ............... 5
Weight, lb (kg) ............... 290 (132)

Width, in (mm) ............... 30 (762)
Capacity, cu.ft (m3) ............... 8.2 (0.233)
Number of Teeth ............... 5
Weight, lb (kg) ............... 323 (147)

Width, in (mm) ............... 36 (914)
Capacity, cu.ft (m3) ............... 10.3 (0.292)
Number of Teeth ............... 6
Weight, lb (kg) ............... 363 (165)

Heavy-Duty Buckets

Width, in (mm) ............... 12 (305)
Capacity, cu.ft (m3) ............... 2.8 (0.079)
Number of Teeth ............... 3
Weight, lb (kg) ............... 235 (107)

Width, in (mm) ............... 16 (406)
Capacity, cu.ft (m3) ............... 3.7 (0.105)
Number of Teeth ............... 3
Weight, lb (kg) ............... 270 (123)

Width, in (mm) ............... 18 (457)
Capacity, cu.ft (m3) ............... 4.2 (0.119)
Number of Teeth ............... 4
Weight, lb (kg) ............... 283 (129)

Width, in (mm) ............... 24 (610)
Capacity, cu.ft (m3) ............... 6.2 (0.176)
Number of Teeth ............... 5
Weight, lb (kg) ............... 337 (153)

Width, in (mm) ............... 30 (762)
Capacity, cu.ft (m3) ............... 8.2 (0.232)
Number of Teeth ............... 5
Weight, lb (kg) ............... 375 (170)

Width, in (mm) ............... 36 (914)
Capacity, cu.ft (m3) ............... 10.3 (0.292)
Number of Teeth ............... 6
Weight, lb (kg) ............... 426 (194)

Ditch Cleaning Buckets

Width, in (mm) ............... 48 (1220)
Capacity, cu.ft (m3) ............... 13.0 (0.37)
Weight, lb (kg) ............... 510 (231)

Width, in (mm) ............... 54 (1370)
Capacity, cu.ft (m3) ............... 15.0 (0.43)
Weight, lb (kg) ............... 555 (252)

Width, in (mm) ............... 60 (1520)
Capacity, cu.ft (m3) ............... 17.0 (0.48)
Weight, lb (kg) ............... 600 (272)

________________________________________________________________________________

________________________________________________________________________________________

CATERPILLAR BACKHOE LOADERS SPECIFICATIONS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________