Specifications, Service and Repair of Farm and Lawn Tractors

John Deere 2032R Tractor Specs

Engine Performance

Advertised Engine Power, Rated, hp (kW) - 31.7 (23.3)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2500
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 7.1 (27)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

JD 2032R Tractor PTO Performance

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 23.5 (17.5)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

John Deere 2032R Tractor Basic Engine Specification

Engine Make - Yanmar
Engine Model - 3TNV88-BNJK
Number of Cylinders - 3
Displacement, cu in (L) - 100.2 (1.642)
Engine Bore, in (mm) - 3.46 (88)
Engine Stroke, in (mm) - 3.54 (90)
Block Design, Replaceable Liners - Cast-in-block
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated

Fuel System

Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct

Emission and Exhaust Treatment

Emission Level, US EPA Tier - Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal

Cooling System

Fan Drive Type - Belt

Electrical System

System Rating, Volts - 12
Alternator Rating, Amps - 40

John Deere 2032R Basic Transmission

Manufacturer's Description - Hydrostatic, 2 range
Transmission Type - Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 2 ranges
Maximum Speed Forward, mph (kph) - 13.5 (21.8)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Yes

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer

John Deere 2032 Rear Axle Assembly

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle

Suspended Front Axle Available - No


Service Brake Type - Wet Disk

John Deere 2032R Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 5.0 (18.8)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 mid-location

JD 2032R 3-Point Hitch Features

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - No

3-Point Hitch Lift Capacity

Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,250 (567)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,433 (650)
Optional Lift Capacity at lift pin, lb (kg) - No option


Drawbar Description - Adjustable

Wheelbase / Trackbase

Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 65.2 (1655)


Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 108.9 (2766)

John Deere 2032 Tractor Vertical Dimensions

Height to Top of Cab, in (mm) - No Cab
Height to Top of ROPS raised, in (mm) - 89.7 (2279)

Width w/Tires or Tracks

Overall Width, with standard wheels or tracks, in (mm) - 55.6 (1412)

Weight (w/Tires or Tracks)

Weight, MFD/4WD w/ROPS, lb (kg) - 1,973 (895)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No Cab
Weight, Total allowable, w/maximum ballast, lb (kg) - np

Tire / Track Size

Front Tire Size orTrack Width, MFD/4WD or Track - 23x8.50-12 6PR R4
Rear Tire Size or Track Width - 14 - 17.5 6PR R4