________________________________________________________________________________

John Deere 210L Specifications

John Deere 210L Engine

Engine Model ................. John Deere PowerTech E 4045HT082
Engine Type ................. 4-Stroke, four-cylinder turbocharged diesel
Number of Cylinders ................. 4
Displacement, cu in (L) ................. 276 (4.50)
Engine Bore, in (mm) ................. 4.19 (106.0)
Engine Stroke, in (mm) ................. 5.00 (127.0)
Aspiration ................. Turbocharged
Rated Engine Power, hp (kW) ................. 93.0 (69.0)
Rated Engine Speed, rpm ................. 2250
Maximum Torque, Nm (ft-lb) ................. 382 (282)
Torque Speed, rpm................. 1400
Compression Ratio ................. 17:1
Firing Order ................. 1-3-4-2
Fuel System ................. Injection pump
Lubrication System ................. Pressure system with spin-on filter and cooler
Air Cleaner ................. Dual-stage dry type
Emissions Level ................. Interim Tier 4
Intake Valve Clearance, in (mm) ................. 0.014 (0.36)
Exhaust Valve Clearance, in (mm) ................. 0.018 (0.46)
Fuel Tank Capacity, gal (L) ................. 31.0 (117.3)
Oil Capacity, qts (L) ................. 13.7 (13.0)
Coolant Capacity, qts (L) ................. 37.0 (35.0)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 120/150

Power Take Off

PTO Operational Type ................. Independent
PTO Horsepower, hp (kW) ................. 75.0 (55.5)
PTO Speed, rpm ................. 540

John Deere 210L Transmission

Transmission Type ................. Power Shift
Gearbox Type ................. 4F/2R, full powershift
Number of Forward Gears ................. 4
Number of Reverse Gears ................. 2
Torque Converter Type .................. Single stage
Torque Converter Ratio .................. 2.63:1
Oil Capacity, qts (L) .................. 16.0 (15.1)
Maximum Forward Speed, mph (kph) ................. 21.4 (34.5)
Maximum Reverse Speed, mph (kph) ................. 7.3 (11.7)

Wheels and Tires

Drive Wheels ................. 4WD 4x4
Steering Configuration ................. Front steer
Steering System ................. Hydrostatic power
Steering Cylinder Bore, in (mm) ................. 2.56 (65)
Steering Cylinder Stroke, in (mm) ................. 8.27 (210)
Steering Cylinder Rod, in (mm) ................. 1.57 (40)
Brakes Type ................. Hydraulic wet disc
Front Tire Size ................. 12-16.5
Rear Tire Size ................. 16.9-24

John Deere 210L Hydraulic System

Hydraulic System Type ................. Open center
Hydraulic Pump Type ................. Single gear, tandem with unloader
Implement Pump Flow (Loader and Hitch), gpm (Lpm) ................. 25.3 (96.0)
Hydraulic Pressure (Loader and Hitch), Bar (psi) ................. 220 (3200)
Hydraulic Fluid Capacity, gal (L) ................. 29.5 (111.7)

3-Point Hitch

Hitch Category ................. 1
Hitch Downforce, lb (kg) ................. 1790 (815)
Lift Capacity, Static at Lower Link, lb (kg) ................. 8630 (3917)
Lower Hitch Point Height (Maximum), in (mm) ................. 30.7 (780)
Lower Hitch Point Height (Minimum) , in (mm) ................. 8.4 (213)
Lift Cylinder Size, in (mm) ................. 3.15x10.0 (80x254)
Pitch Cylinder Size, in (mm) ................. 2.50x7.75 (63x197)
Tilt Cylinder Size, in (mm) ................. 3.00x4.75 (76x121)
Hitch Raise, sec ................. 1.5
Hitch Lower, sec ................. 1.2
Pitch (Up/Down), sec ................. 1.6/1.6
Tilt (Up/Down), sec ................. 1.4/1.2

Dimensions and Weight

Wheelbase, in (mm) ................. 85 (2150)
Length, in (mm) ................. 209 (5300)
Height (Cab), in (mm) ................. 104 (2640)
Height (ROPS), in (mm) ................. 103 (2610)
Overall Width, in (mm) ................. 84 (2130)
Ground Clearance, in (mm) ................. 10.3 (260)
Weight (Shipping), lb (kg) ................. 11325 (5135)
Weight (Operating), lb (kg) ................. 14205 (6445)

Loader Specifications

Maximum Lift Height (to pin), in (mm) ................. 131 (3320)
Clearance, Dumped Bucket, in (mm) ................. 108 (2740)
Reach At Full Height, in (mm) ................. 27.5 (690)
Dump Angle, deg ................. 45
Rollback Angle, deg ................. 40
Breakout Force (at pin), lb (kg) ................. 8700 (3945)
Lift to Full Height (at pin), lb (kg) ................. 5432 (2465)
Bucket Width, in (mm) ................. 86 (2180)
Bucket Capacity, cu.yd (m3) ................. 1.25 (0.96)
Bucket Weight, lb (kg) ................. 1750 (795)
Boom Cylinder Size, in (mm) ................. 3.15x31.1 (80x790)
Bucket Cylinder Size, in (mm) ................. 3.54x29.3 (90x745)
Raising Time to Full Height, second .................. 5.1
Bucket Dumping Time, second .................. 2.4
Lowering Time, second .................. 3.4