________________________________________________________________________________

John Deere 3025E Specs

John Deere 3025E Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 24.7 (18.4)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2400
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 6.2 (23.5)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Make - Yanmar
Engine Model - 3TNV88F-EPJT1
Number of Cylinders - 3
Displacement, cu in (L) - 100.2 (1.642)
Engine Bore, in (mm) - 3.465 (88)
Engine Stroke, in (mm) - 3.543 (90)
Block Design, Replaceable Liners - Cast-in-block
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - EGR standard
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 55

Power Take-Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 17.4 (13)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

JD 3025E Transmission

Manufacturer's Description - Hydrostatic, 2 range
Transmission Type - Hydrostatic, 2-range
Number of Forward / Reverse Speeds - Infinite, 2 ranges
Maximum Speed Forward, mph (kph) - 14.1 (22.7)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Two-pedal HST

Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 60 (1524)
Front Tire Size orTrack Width, MFD/4WD or Track - 25x8.50-14, R4 Industrial or 7-14, R1 Ag
Rear Tire Size or Track Width - 15.00-19.5, R4 Industrial or 11.2-24, R1 Ag

John Deere 3025E Axles and Brakes

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet disc

JD 3025E Hydraulics and Hitch

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Dual gear
Implement Pump Flow, gpm (Lpm) - 5.3 (20.2)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 optional
3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - No; quick hitch optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,356 (615)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Drawbar optional

John Deere 3025E Dimensions and Weights

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 111.0 (2819)
Height to Top of ROPS raised, in (mm) - 82.3 (2090)
Overall Width, with standard wheels or tracks, in (mm) - 58.0 (1473)
Weight, MFD/4WD w/ROPS, lb (kg) - 2,222 (1008)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - 2,264 (1027)