Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

John Deere 6100 Tractor Specs

John Deere 6100 Engine Specifications

Engine Model - John Deere 4045 H PowerTech E, 2V
Cylinders - 4
Displacement, cu in (L) - 276 (4.5)
Engine Bore, in (mm) - 4.193 (106.5)
Engine Stroke, in (mm) - 5.0 (127)
Block Design, Replaceable Liners - Wet liners
Aspiration, Turbocharged or Naturally Aspirated - Turbo, Air-to-Air Intercooled
Engine Power, Rated, hp (kW) - 98 (72.7)
Maximum Engine Power, hp (kW) - Same as Advertised
Engine Speed, rpm - 2100
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 41.7 (158)
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 90

JD 6100 Transmission

Description - 9F/9R PowrReverser
Transmission Type - Gear
Forward / Reverse Speeds - 9F / 9R
Maximum Speed Forward, mph (kph) - 17.6 (28.3)
Creeper Range - No
Shuttle (Forward-Reverse) - Yes

Optional Transmission

Description - 9F/3R Top Shaft Synchronized
Transmission Type - Gear
Forward / Reverse Speeds - 9F / 3R

John Deere 6100 PTO (Power take off)

PTO Horsepower, hp (kW) - 82 (61.1)
PTO Speeds, rpm - 540 / 1000
PTO operational Type - Independent

Wheels

Drive Wheels - 2WD / 4WD
Steering Configuration - Front Steer

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle and Brakes

Suspended Front Axle - No
Brake Type - Wet Disk

JD 6100 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 17.6 (66.6)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 2

Hitch and Drawbar

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Lower link draft sensing
Draft Link Ends Adjustable - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 6,800 (3084)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No Option
Optional Lift Capacity at lift pin, lb (kg) - No Option
Drawbar Description - Swinging Vertical Offset Drawbar

Wheelbase and Tires

Wheelbase, 2WD, in (mm) - 92.5 (2350)
Wheelbase, 4WD, in (mm) - 92.5 (2350)
Front Tire Size, 2WD - 10.00 -16 6PR F2
Front Tire Size, 4WD - 13.6 -24 6PR R1
Rear Tire Size - 18.4 -34 8PR R1

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________