Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

John Deere 6230 Tractor Specs

JD 6230 Engine Specifications

Engine Model - 4.5L PowerTech E
Cylinders - 4
Displacement, cu in (L) - 276 (4.5)
Engine Bore, in (mm) - 4.193 (106.5)
Engine Stroke, in (mm) - 5.0 (127)
Block Design, Replaceable Liners - Wet sleeve
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air to water aftercooling
Engine Power, Rated, hp (kW) - 95 (71)
Maximum Engine Power, hp (kW) - Same as Advertised
Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 43.6 (165)
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 115

John Deere 6230 Transmission

Description - SyncroPlus 12F/4R
Transmission Type - Gear
Forward / Reverse Speeds - 12F / 4R
Maximum Speed Forward, mph (kph) - 19 (30.6)
Creeper Range - Yes
Shuttle (Forward-Reverse) - No

Optional Transmissions

Description - SyncroPlus 16F/16R
Transmission Type - Gear
Forward / Reverse Speeds - 16F / 16R

Description - PowerQuad PLUS
Transmission Type - Gear
Forward / Reverse Speeds - 16F / 16R

JD 6230 PTO (Power take off)

PTO Horsepower, hp (kW) - 76 (57)
PTO Speeds, rpm - 540 / 1000
PTO operational Type - Independent

Wheels

Drive Wheels - 2WD / 4WD
Tractor Steering Configuration - Front Steer
Wheelbase, 2WD, in (mm) - 94.5 (2400)
Wheelbase, 4WD, in (mm) - 94.5 (2400)

Rear and Front Axles

Final Drive - Planetary / Inboard
Axle Output End - Flanged standard / Bar optional
Axle Bar Diameter, in (mm) - 3.1 (78.7)
Suspended Front Axle - Triple-Link Suspension optional
Brake Type - Wet disk

John Deere 6230 Hydraulic System

Hydraulic System Type - Open center, load sensing, constant flow
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 21.1 (80)
Optional Pump Flow, gpm (Lpm) - 29 (110)
Standard Remote Valves - 1

Hitch and Drawbar

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 3N / 2
Draft Sensing or Lift Control - Optional, pins in lower link
Draft Link Ends Adjustable - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,028 (2280)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No Option

Tire Size

Front Tire Size, 2WD - 10.0 - 16
Front Tire Size, 4WD - 12.4R24 R1W
Rear Tire Size - 18.4R30 R1W

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________