________________________________________________________________________________

John Deere 6330 Specs

Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 105 (78)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 43.6 (165)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Model - John Deere 4.5L PowerTech E
Number of Cylinders - 4
Displacement, cu in (L) - 276 (4.5)
Engine Bore, in (mm) - 4.17 (106)
Engine Stroke, in (mm) - 5.0 (127)
Block Design, Replaceable Liners - Wet sleeve
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air to water aftercooling
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 115

JD 6330 PTO

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 85 (63)
PTO Speeds, rpm - 540 / 1000
PTO operational Type (Independent; Live; Continuous) - Independent

John Deere 6330 Transmission

Manufacturer's Description - SyncroPlus 12F/4R
Transmission Type - Gear
Number of Forward / Reverse Speeds - 12F / 4R
Maximum Speed Forward, mph (kph) - 19 (30.6)
Creeper Range Available - Yes
Shuttle (Forward-Reverse) Available - No

Optional Transmissions

Manufacturer's Description - SyncroPlus 16F/16R
Transmission Type - Gear
Number of Forward / Reverse Speeds - 16F / 16R

Manufacturer's Description - PowerQuad PLUS
Transmission Type - Gear
Number of Forward / Reverse Speeds - 16F / 16R

JD 6330 Wheels and Tires

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer
Wheelbase, 2WD, in (mm) - 94.5 (2400)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 94.5 (2400)
Front Tire Size, 2WD - 10.0 - 16
Front Tire Size orTrack Width, MFD/4WD or Track - 14.9R24 R1W
Rear Tire Size or Track Width - 18.4R34 R1W

John Deere 6330 Axles and Brakes

Final Drive Location and Description - Planetary / Inboard
Rear Axle Output End, Flange or Bar - Flanged standard / Bar optional
Rear Axle Bar Diameter, in (mm) - 3.1 (78.7)
Suspended Front Axle Available - Triple-Link Suspension optional
Service Brake Type - Wet disk

JD 6330 Hydraulic System

Hydraulic System Type - Open center, load sensing, constant flow
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 21.1 (80)
Optional Pump Flow, gpm (Lpm) - 29 (110)
Number of Standard Remote Valves - 1

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 3N / 2
Draft Sensing or Lift Control - Optional, pins in lower link
Draft Link Ends Telescopic - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,028 (2280)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - np
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging

John Deere 6330 Dimensions and Weight

Length, 2WD, incl. Hitch/Drawbar, in (mm) - np
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - np
Height to Top of Cab, in (mm) - np
Height to Top of ROPS raised, in (mm) - np
Overall Width, with standard wheels or tracks, in (mm) - np
Weight, 2WD w/ROPS, lb (kg) - 7,695 (3490)
Weight, MFD/4WD w/ROPS, lb (kg) - 9,491 (4305)
Weight, 2WD w/Cab, lb (kg) - 9,182 (4165)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 10,009 (4540)
Weight, Total allowable, w/maximum ballast, lb (kg) - 18,078 (8200)