________________________________________________________________________________

John Deere 7130 Specs

JD 7130 Engine Specifications

Engine Model - John Deere 4.5L PowerTech Plus, 4V
Cylinders - 4
Displacement, cu in (L) - 276 (4.5)
Engine Bore, in (mm) - 4.193 (106.5)
Engine Stroke, in (mm) - 5.0 (127)
Engine Power, Rated, hp (kW) - 125 (93)
Maximum Engine Power, hp (kW) - 145 (108)
Engine Speed, rpm - 2300
Power Boost, hp (kW) - 20 (15)
Fuel Tank, gal (L) - 66 (250)
Block Design, Replaceable Liners - Wet sleeve
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged, air to water aftercooling
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - Cooled EGR
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe - Vertical std; Horizontal opt.
Cooling System Fan Drive Type - Viscous
Tractor Electrical System Rating, Volts - 12
Alternator Rating, Amps - 115 Std; 150 or 200 Opt.

Power Take Off

PTO Horsepower, hp (kW) - 101 (75)
PTO Speeds, rpm - 540 / 540E / 1000
PTO operational Type - Independent

John Deere 7130 Tractor Transmission

Description - PowrQuad Plus 16F/16R
Transmission Type - Fully synchronized
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 19 (30.6)
Creeper Range - Optional
Shuttle (Forward-Reverse) - Included

Description - AutoQuad Plus 24F/24R
Transmission Type - Fully synchronized
Forward / Reverse Speeds - 24F / 24R

Description - Infinitely Variable (IVT)
Transmission Type - Hydrostatic powershift
Forward / Reverse Speeds - Infinite

JD 7130 Wheels and Tires

Drive Wheels - 2WD / 4WD
Tractor Steering Configuration - Front Steer
Wheelbase, 2WD, in (mm) - 112.8 (2865)
Wheelbase, 4WD, in (mm) - 104.3 (2650)
Front Tire Size, 2WD - 11.00-16, 12PR F2
Front Tire Size, 4WD - 380/85R28
Rear Tire Size - 480/80R38

Axles and Brakes

Final Drive - Inboard planetary
Rear Axle Output End - Bar standard / Flanged optional
Rear Axle Bar Diameter, in (mm) - 3.386 (86)
Front Axle - MFWD
Suspended Front Axle - Optional
Brake Type - Inboard wet disc

John Deere 7130 Hydraulic System

Hydraulic System Type - Closed center, pressure flow compensated
Standard Pump Flow, gpm (Lpm) - 29 (110)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 2

3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 3N/2
Draft Sensing or Lift Control - Electrohydraulic
Draft Link Ends Adjustable - Optional
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 5,100 (2313)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 8,200 (3719)
Drawbar Description - Swinging

JD 7130 Dimensions and Weights

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 201.9 (5128)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 201.9 (5128)
Height to Top of Cab, in (mm) - 114.4 (2906)
Height to Top of ROPS raised, in (mm) - No open ROPS
Overall Width, with standard wheels or tracks, in(Mm) - 93.2 (2367)
Weight, 2WD w/ROPS, lb (kg) - No open ROPS
Weight, MFD/4WD w/ROPS, lb (kg) - No open ROPS
Weight, 2WD w/Cab, lb (kg) - 10,800 (4898)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 12,930 (5865)
Weight, Total allowable, w/maximum ballast, lb (kg) - 20,944 (9500)