Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

Massey Ferguson GC1715 Tractor Specs

MF GC1715 Engine Specifications

Engine Model - Iseki E3112-WB
Number of Cylinders - 3
Displacement, cu in (L) - 68.5 (1.123)
Engine Bore, in (mm) - 3.08 (78.2)
Iseki E3112 Engine Stroke, in (mm) - 3.07 (78)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Advertised Engine Power, Rated, hp (kW) - 25 (18.6)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 3000
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 6.6 (25)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

Iseki E3112 Fuel System

Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber - Indirect

Emission and Exhaust Treatment

Emission Level, US EPA Tier - Tier 4 Interim
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal

Electrical System

System Rating, Volts - 12
Alternator Rating, Amps - 40

Power Take Off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 19.6 (14.6)
PTO Speeds, rpm - 540
PTO operational Type - Independent

Massey Ferguson GC1715 Transmission

Manufacturer's Description - Hydrostatic
Transmission Type - 2-range w/ cruise control
Number of Forward / Reverse Speeds - Infinite, 2 ranges
Maximum Speed Forward, mph (kph) - 9.1 (14.7)
Shuttle (Forward-Reverse) Available - Yes

Wheel Configuration

Drive Wheels - 4WD
Steering Configuration - Front Steer
Wheelbase, MFD/4WD or Track, in (mm) - 57.1 (1450)
Front Tire Size, MFD/4WD or Track - 18x8.50-10, R1, R3 or R4
Rear Tire Size - 26x12.00-12, R1, R3 or R4

GC1715 Massey Ferguson Rear Axle

Final Drive Location and Description - Inboard
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

MF GC1715 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 4.8 (18.8)
Optional Pump Flow, gpm (Lpm) - No option

Massey Ferguson GC1715 Hitch and Drawbar

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Directional control
Draft Link Ends Telescopic - Fixed
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 550 (250)
Standard Lift Capacity at lift pin, lb (kg) - 1,190 (540)
Drawbar Description - Fixed

Dimensions and Weight

Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 97.6 (2480)
Height to Top of ROPS raised, in (mm) - 72.8 (1850)
Width w/Tires, with standard wheels or tracks, in (mm) - 47.25 (1200)
Weight, MFD/4WD w/ROPS, lb (kg) - 1,433 (650)

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________