Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland Boomer 2030 Specs

NH Boomer 2030 Engine Specifications

Engine Model - Shibaura N843
Number of Cylinders - 3
Displacement, cu in (L) - 91.3 (1.5)
Engine Bore, in (mm) - 3.31 (84)
Engine Stroke, in (mm) - 3.54 (90)
Advertised Engine Power, Rated, hp (kW) - 31 (23.1)
Maximum Engine Power, hp (kW) - Same as Advertised
Rated Engine Speed, rpm - 2600
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 7.3 (27.6)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40

Power Take-Off

PTO Horsepower, hp (kW) - 26.5 (19.8) / 24.9 (18.6)
PTO Speeds, rpm - 540
PTO operational Type - Live

New Holland Boomer 2030 Basic Transmission

Manufacturer's Description - 9x3 Gear
Transmission Type - Gear
Number of Forward / Reverse Speeds - 9F/3R
Maximum Speed Forward, mph (kph) - 15.63 (26.16)
Creeper Range Available - No

Optional Transmission

Manufacturer's Description - 3 Range HST
Transmission Type - Gear
Number of Forward / Reverse Speeds - Infinite, 3 range

NH Boomer 2030 Wheels and Tires

Drive Wheels - 4WD
Steering Configuration - Front Steer std; SuperSteer opt
Front Tire Size orTrack Width, MFD/4WD or Track - 7 - 14 6PR R1
Rear Tire Size or Track Width - 11.2 - 24 4PR R1
Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase, MFD/4WD, in (mm) - 63 (1600) std; 72 (1829) SuperSteer

Axles and Brakes

Rear Axle Output End, Flange or Bar - Flange
Rear Axle Bar Diameter, in (mm) - No bar axle
Suspended Front Axle Available - No
Service Brake Type - Wet Disc

New Holland Boomer 2030 Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 12.3 (46.5)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - None Std

3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,635 (743)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Swinging, extendable

NH Boomer 2030 Dimensions and Weight

Length, incl. Hitch/Drawbar, in (mm) - 106 (2697) std; 115 (2928) Super Steer
Height to Top of ROPS raised, in (mm) - 87.8 (2230)
Overall Width, with standard wheels, in (mm) - 59.5 (1511)
Weight, MFD/4WD w/ROPS, lb (kg) - 2,339 (1060.8)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD w/Cab, without ballast, lb (kg) - No Cab

New Holland 914A-60 Mower deck

Type - 3-blade mid-mount
Cutting width - 60 inches (152 cm)
Overall width - 73.25 inches (186 cm)
Cut height - 1 to 3.5 inch (2 to 8 cm)

New Holland 240TL Loader

Weight - 610 lbs (276 kg) (without bucket)
Height (to pin) - 98.4 inches (249 cm)
Clearance, dumped bucket - 75.3 inches (191 cm)
Dump reach - 31 inches (78 cm)
Dump angle - 39
Reach at ground - 70.9 inches (180 cm)
Rollback angle - 32
Breakout force (at pin) - 2,700 lbs (1224 kg)
Breakout force (at 500mm) - 1,900 lbs (861 kg)
Lift to full height (at pin) - 1250 lbs (567 kg)
Lift to full height (at 500mm) - 875 lbs (396 kg)
Lift to 1.5m (at pin) - 1,596 lbs (723 kg)
Lift to 1.5m (at 500mm) - 1,183 lbs (536 kg)
Bucket capacity - 0.471,0.534 cu yd (0.4 cu m)
Bucket width - 60 inches (152 cm) / 68 inches (172 cm)

New Holland 920GH Backhoe

Weight - 875 lbs (396 kg)
Bucket width - 9 inches (22 cm) / 12 inches (30 cm)
Bucket width - 16 inches (40 cm) / 18 inches (45 cm)
Bucket width - 24 inches (60 cm) / 36 inches (91 cm)
2-Foot flat digging depth - 89.9 inches (228 cm)
Reach from pivot - 123 inches (312 cm)
Loading height - 69.8 inches (177 cm)
Bucket force - 2,785 lbs (1263 kg)
Dipperstick force - 2,020 lbs (916 kg)

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________