Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland T2410 Tractor Specs

T2410 NH Engine Specifications

Engine Model - Shibaura ISM-N844L-T
Engine Power, Rated, hp (kW) - 55 (41.0)
Rated Engine Speed, rpm - 2700
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 13.5 (51.1)
Cylinders - 4
Displacement, cu in (L) - 135.2 (2.2)
Engine Bore, in (mm) - 3.31 (84)
Engine Stroke, in (mm) - 3.94 (100)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - In-Line Pump System
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Indirect
Exhaust Pipe - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 55

T2410 New Holland Transmission

Description - 12x12 Sync Shuttle Shift
Transmission Type - Synchronized
Forward / Reverse Speeds - 12F / 12R
Maximum Speed Forward, mph (kph) - 16.40 (26.40)
Creeper Range - No
Shuttle (Forward-Reverse) - Std

Optional Transmission

Description - Electro-hydraulic Shuttle Shift
Transmission Type - Synchronized
Forward / Reverse Speeds - 12F / 12R

NH T2410 Power Take Off

PTO Horsepower, hp (kW) - 46.5 (34.7) / 45.5 (33.9)
PTO Speeds, rpm - 540
PTO Type - Independent

Wheels and Tires

Drive Wheels - 2WD / 4WD
Steering - Front Steer
Wheelbase, 4WD, in (mm) - 74.8 (1900)
Front Tire Size Width, 4WD - 9.5x16
Rear Tire Size Width - 14.9x24

T2410 Rear Axle

Final Drive - Spur / Inboard
Axle Output End - Flange
Axle Bar Diameter, in (mm) - No bar axle
Brake Type - Wet disc

New Holland T 2410 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 11.60 (43.86)
Optional Pump Flow, gpm (Lpm) - No option
Standard Remote Valves - 0

3-Point Hitch

3-Point Hitch Category - Category 1 / 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Top link sensing
Draft Link Ends Adjustable - Std
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,465 (1572)
Standard Lift Capacity at lift pin, lb (kg) - 4,355 (1975)
Drawbar Description - Swinging extendable

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________