Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland T6030 Plus Tractor Specs

Classification - Utility tractor

New Holland T-6030 Engine Specifications

Engine Model - New Holland NEF 667TA
Type - 6 stroke Direct injection
Engine Power, Rated, hp (kW) - 115 (86.3)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 67 (254) / 60.8 (230) Supersteer
Cylinders - 6 (2 valve per cylinder)
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged / air-to-air intercooled
Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Engine cooled - Water cooled
Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

New Holland T6030 Transmission

Description - 16F / 16R ElectroShift
Transmission Type - 4 range Powershift
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 18.90 (30.30) 2WD / 23.79 (38.14) FWD
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes

Optional Transmission

Description - 16F / 16R AutoShift
Transmission Type - 4 speed PowerShift
Forward / Reverse Speeds - 16F /16R
Gears - with creeper 32x32

NH T6030 Tractor PTO

PTO Horsepower, hp (kW) - 95 (71)
PTO Speeds, rpm - 540 / 1000
Power Take Off Type - Independent

Wheels and Steering

Drive Wheels - 2WD / 4WD
Steering - Front Steer std; SuperSteer opt
Steering system - Hydrostatic
Steering angle - 55degree

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange / bar Optional
Axle Bar Diameter, in (mm) - 3.6 (92)
Suspended Front Axle - Yes, Opt.

Brakes

Brake Type - Wet disc

New Holland T-6030 Tractor Hydraulic System

Hydraulic System Type - Closed Center Load Sensing
Main Hydraulic Pump Type - Variable Displacement
Standard Pump Flow, gpm (Lpm) - 26.5 (100.3)
Optional Pump Flow, gpm (Lpm) - No option
Control type - Electronic draft control
Standard Remote Valves - 2 Mechanical or 2 Electronic

NH T6030 3-Point Hitch Features

3-Point Hitch Category - Category 2
Optional Hitch Category - Category 2 / 3N w/ EDC
Draft Sensing or Lift Control - Lower Link Mechanical(MDC), Bosch Lower Link Electronic(EDC)
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 9,285 (4212)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - 9,620 (4364) EDC

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 2WD, in (mm) - 104.4 (2652)
Wheelbase, 4WD, in (mm) - 104.7 (2661) std; 108.6 (2760) SuperSteer

Tire Size

Front Tire Size, 2WD - 10.00 x 16
Front Tire Size Width, 4WD - 14.9R28
Rear Tire Size Width - 18.4R38

Weight

Operating weight - 5,030kg / 11,066Lbs
Total weight - 9,000kg / 19,800Lbs

Dimensions

Length - 4,532mm / 178Inch
Width - 1,913mm / 75Inch
Heigth - 2,770mm / 109Inch
Cab Height - 2,770mm / 109Inch
Ground clearance - 478mm / 19Inch

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________