________________________________________________________________________________

Cub Cadet LTX1045 Lawn Tractor Problems

Cub Cadet LTX 1045 Engine Troubleshooting

Kohler engine not to start

Gas tank is empty - Add fuel.
Wrong grade of gasoline - Use correct fuel grade.
Old gasoline - Drain gasoline and change with fresh.
Fuel system clogged - Repair or replace.
Plug connection defective - Check wires connection.
Spark plug damaged - Installing new spark plug.
Dirty fuel filter - Replace fuel filter.
Safety contact for brake pedal defective - Install new part.
Carburetor problems - Carburetor diagnostics required.
Inspect and adjust throttle cable. Compression problems.

Engine hard starting

Faulty spark plug - Check the spark and change defective spark.
Carburetor settings incorrect - Adjusting as required.
Fuel pipes are clogged - Service required.
Choke cable damaged - Replacement required.
Stale or incorrect fuel - Fill in correct fuel.
Electrical connections are damaged - Inspect and change wires if required.
Starter problems - Check starter, repair or replace.

Engine runs roughly

Cooling fins blocked - Clean and wash cooling fins.
Electrical contacts are damaged - Check and replace damaged connections.
Ignition setting defective - Check spark plug and ignition.
Throttle cable sticking - Check and change if required.
Air cleaner element plugged - Clean or replace the air filter.

Kohler engine misses

Spark plug failed - Test spark plug.
Carburetor problems - Test and repair.
Ignition coil air gap incorrect - Check and adjust ignition coil air gap.

Engine overheating

Excessive engine load - Reduce the load.
Air intake screen plugged - Clean and wash dirty components.
Too much or too little oil - Check oil level. Test engine oil pressure.
Improper engine oil viscosity - Change engine oil.
Check connecting rod to crankshaft bearing clearance.
Fast idle speed - Adjusting fast idle speed.

Engine will not idle

Spark plug not gapped correctly - Check tightness of spark plug.
Spark plug worn out - Test spark and replace as required.

Engine knocking

Stale fuel - Change fuel.
Excessive engine load - Reduce loads.
Low oil level - Add engine oil.
Engine is running at low revs - Adjust carburetor.
Piston rings and cylinder bore worn - Replace defective components.
Inspect for engine overheats from clogged cooling fins.
Inspect and adjusting crankshaft end play.
Check for worn crankshaft or camshaft bearings.

Engine back-fire

Checking spark plug.
Check and adjust the choke.
Test carburetor, adjust if necessary.
Checking and adjusting ignition coil air gap.
Inspect for sticking valves.
Check and adjust valve clearance.
Inspect flywheel key.

Kohler engine loses power

Engine temperature too high - Replace air cleaner.
Excess engine oil - Remove excess oil.
Defective fuel pump - Repair or replace fuel pump.
Defective governor - Repair or replace governor.
Inspect and repair carburetor.
Check engine compression.

Engine getting too much fuel

Insufficient choke opening - Inspect throttle cable.
Incorrect carburetor adjustment - Check and adjust carburetor.

Black smoke is emitted during operation

Air cleaner element plugged - Check and clean.
Throttle is partially engaged - Inspect and adjust throttle.
Check for correct main jet for elevation.

Cub Cadet LTX1045 Electrical System Troubleshooting

Starter does not function

Fuse is defective - Installing new fuse.
Poor terminal connection - Clean contacts.
Weak battery - Battery charging required.
Ignition switch is damaged - Install new switch.
Damaged starter - Change the starter.
Wiring disconnected - Reconnect wires.

Battery will not charge

Dead cell in the battery - Install new battery.
Poor contact between cable and battery pole - Clean or replace cable.

Lighting does not function

Headlight wire connector disconnected.
Bulbs defective.
Wiring damaged - Check and replace.

Cub Cadet LTX 1045 Machine Troubleshooting

Excessive tractor vibration

Implements drive belts damaged or worn - Inspect and change damaged belt.
Traction drive belt worn - Install new belt.
Drive pulley is dirty - Fit new pulley.
Blades bent or out of balance - Tighten and balance blade.

Engine runs but tractor won't move

Parking brake locked - Release the parking brake.
Bypass valve pulled out - Disengage the bypass valve lever.
Mower blades are loose - Fasten the blades securely.
Blades are unbalanced - Check blade balancing.
Transmission oil is insufficient - Add transmission oil.

Cub Cadet LTX 1045 Mower Deck Problems

Discharge chute clogged

Operating at a faster ground speed - Need to reduce speed.
Grass has grown too long - Adjust cutting height.
The grass is wet - Do not use the mower if grass is wet.
Engine rpm too low - The throttle is not fully open.
Lack of air flow - Check engine speed.
cut too low - Use higher cutting.
Belt fitted incorrectly - Check belt installation.

Lawn mower leaving uncut grass

Cutting deck clogging - Inspect and clean cutting deck.
Excessive blade wear - Installing new blade.
Deck level is too low - Deck leveling required.
Bagger too full - Clean grass bag.
Ground speed too fast - Do not use high speed.

Belt slips

Sheave is dirty - Check and clean.
Drive belt damage - Fit new belt.
Belt tension problems - Belt tension needs to be adjusted.

Excessive mower vibration

Debris in pulleys or in mower deck - Clean mower deck and sheave from debris.
Worn belt or sheave - Replace defective parts.
Pulleys or belt misaligned - Inspect and adjust.
Improper blade balancing - Adjust blade balance.

Blade strips grass

Cutting too low - Check and adjust height.
Mower wheel height incorrect - Adjust mower deck wheels.
Tires inflated insufficient - Increase tire pressure.
Faster mower blade speeds - Correct blades speed.
Bent mower blades - Replace blades.

Uneven Cut

Deck level is too low - Adjust and level the deck height.
Low tire inflation - Need to inflate tires.
Incorrect rollers height - Check wheel adjustment.
Operating at a faster ground speed - Don't use fast speed.
Blades dull - Check for blade damage and replace if necessary.

CUB CADET TRACTORS TROUBLESHOOTING
1050	1863	2166	2182	2186
3184	3205	GT1554	GT2550	GTX2100
LT1040	LT1042	LT1045	LT1046	LT1050
LT2180	LTX1040	LTX1042	LTX1045	LTX1046
LTX1050	SLTX1054	XT1 LT42	XT1 LT46	XT3 GSX