________________________________________________________________________________

International Harvester 484 Technical Data

International Harvester 484 Engine Specifications

Engine Model ................. International Harvester D-179
Engine Type ................. 4-stroke, 3-cylinder liquid-cooled diesel
Number of Cylinders ................. 3
Displacement, cu in (L) ................. 179 (2.90)
Engine Bore, in (mm) ................. 3.88 (98.0)
Engine Stroke, in (mm) ................. 5.06 (129.0)
Aspiration ................. Natural
Rated Engine Power, hp (kW) ................. 50.0 (37.3)
Rated Engine Speed, rpm ................. 2200
Idle Speed, rpm ................. 700-2400
Compression ................. 15:1
Fuel System ................. Direct injection
Air Cleaner ................. Dry
Fuel Tank Capacity, gal (L) ................. 20.0 (75.7)
Oil Capacity, qts (L) ................. 6.8 (6.4)
Coolant Capacity, qts (L) ................. 12.0 (11.4)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator

IH 484 Power Take-Off

PTO Operational Type ................. Independent
PTO Horsepower, hp (kW) ................. 42.4 (31.5)
PTO Clutch ................. Hydraulic wet disc
PTO Speeds, rpm ................. 540

Transmission

Transmission Type ................. Synchromesh
Gearbox Type ................. 8F/4R
Number of Forward Gears ................. 8
Number of Reverse Gears ................. 4
Clutch ................. Dry disc
Oil Capacity, qts (L) ................. 36.0 (34.1)
Maximum Forward Speed, mph (kph) ................. 16.7 (26.8)
Maximum Reverse Speed, mph (kph) ................. 5.2 (8.4)

International Harvester 484 Wheels and Tires

Drive Wheels ................. 2WD 4x2
Steering Configuration ................. Front Steer
Steering System ................. Hydrostatic power
Brakes Type ................. Independent hydraulic wet disc
Front Tire Size ................. 6.00x16
Rear Tire Size ................. 13.6x28

Hydraulics and Hitch

Hydraulic System Type ................. Open Center
Implement Pump Flow, gpm (Lpm) ................. 15.4 (58.3)
Hydraulic Capacity, gal (L) ................. 9.0 (34.1)
Hydraulic Pressure, Bar (psi) ................. 172 (2500)
Number of Standard Remote Valves ................. 0/2
3-Point Hitch Category ................. 2
Draft Sensing or Lift Control ................. Position and draft control
Standard Lift Capacity at lift pin, lb (kg) ................. 3100 (1405)

IH 484 Dimensions and Weight

Wheelbase (Standard), in (mm) ................. 79 (2000)
Wheelbase (Low-Profile), in (mm) ................. 78.3 (1980)
Length (Standard), in (mm) ................. 133.7 (3390)
Length (Low-Profile), in (mm) ................. 138.3 (3510)
Height (Steering Wheel), in (mm) ................. 61 (1540)
Overall Width (Standard), in (mm) ................. 70.4 (1780)
Overall Width (Low-Profile), in (mm) ................. 78.5 (1990)
Ground Clearance (Standard), in (mm) ................. 15.8 (400)
Ground Clearance (Low-Profile), in (mm) ................. 10.7 (270)
Weight (Standard), lb (kg) ................. 5200 (2360)
Weight (Low-Profile), lb (kg) ................. 5140 (2330)