Backhoe Loaders and Industrial Tractors Technical Specifications

________________________________________________________________________________

Caterpillar 416C Backhoe Loader

Caterpillar 416C Engine

Engine Model ............... Caterpillar 3054 DINA
Engine Type ............... 4-Cycle, 4-cylinder, direct injection diesel
Number of Cylinders ............... 4, In-Line
Displacement, cu in (L) ............... 243 (4.00)
Engine Bore, in (mm) ............... 3.94 (100.0)
Engine Stroke, in (mm) ............... 5.00 (127.0)
Aspiration ............... Natural
Maximum Engine Power, hp (kW) ............... 78.0 (59.0)
Rated Engine Power, hp (kW) ............... 75.0 (56.0)
Rated Engine Speed, rpm ............... 2200
Compression ............... 16.2:1
Fuel System ............... Direct Injection
Rotation ............... Counterclockwise
Air Cleaner ............... Dry-type
Fuel Tank Capacity, gal (L) ............... 33.7 (128.0)
Oil Capacity, qts (L) ............... 7.4 (7.0)
Coolant Capacity, qts (L) ............... 22.3 (21.0)
Electrical System Rating, Volts ............... 12
Alternator Rating, Amp ............... 52

Caterpillar 416C Transmission

Transmission Type ............... Power Shuttle
Gearbox Type ............... 4F/4R, Full synchromesh
Number of Forward Gears ............... 4
Number of Reverse Gears ............... 4
Torque Converter ............... Single-stage
Torque Converter Ratio ............... 2.21:1
Oil Capacity, qts (L) ............... 10.6 (10.0)
Maximum Forward Speed, mph (kph) ............... 21.1 (34.0)
Maximum Reverse Speed, mph (kph) ............... 21.1 (34.0)
Service Brakes ............... Fully enclosed, hydraulic, multiple discs
Parking Brake ............... Mechanical, independent

Hydraulic System

Hydraulic System Type ............... Load-sensing, closed center
Hydraulic Pump Type ............... Variable, axial piston
Hydraulic Pump Flow, gpm (Lpm) ............... 43.0 (162.0)
Hydraulic Pressure, Bar (psi) ............... 207 (3000)
Hydraulic System Capacity, gal (L) ............... 20.8 (79.0)
Valves Type ............... Pressure-compensated

Cat 416C Wheels and Tires

Drive Wheels ............... 2WD/4WD
Steering Configuration ............... Front Steer
Steering System ............... Hydrostatic
Steering Cylinder ............... One, Double-acting
Steering Cylinder Bore, in (mm) ............... 3.0 (76)
Steering Cylinder Stroke, in (mm) ............... 8.75 (221)
Steering Cylinder Rod Diameter, in (mm) ............... 1.9 (48)
Front Tire Size (2WD) ............... 11L-16, 12 PR, F3
Rear Tire Size (2WD) ............... 16.9-24, 8 PR, R4
Front Tire Size (4WD) ............... 12.5/80-18, 10 PR, SG
Rear Tire Size (4WD) ............... 19.5L-24, 8 PR

Dimensions and Weight

Wheelbase ............... 83 in (2100 mm)
Transport Length ............... 22 ft 7 in (6890 mm)
Overall Length, (Loader on ground) ............... 22 ft 6 in (6870 mm)
Transport Height ............... 11 ft 9 in (3585 mm)
Height (Cab) ............... 112.6 in (2850 mm)
Height (Exhaust) ............... 105.5 in (2670 mm)
Overall Width ............... 88.3 in (2235 mm)
Ground Clearance ............... 11.7 in (297 mm)
Front Tread ............... 70.4 in (1780 mm)
Rear Tread ............... 67.7 in (1714 mm)
Turning Radius ............... 17 ft 6 in (5335 mm)
Weight ............... 13890 lbs (6300 kg)

Cat 416C Loader Specifications

Dimensions and Performance Data

Bucket Hinge Pin, Maximum Height ............... 10 ft 9 in (3290 mm)
Dump Angle at Full Height ............... 45 degrees
Dump Clearance at 45 deg ............... 98.6 in (2495 mm)
Dump Reach at 45 deg ............... 33.2 in (840 mm)
Maximum Bucket Rollback at Ground Level ............... 40 degrees
Digging Depth ............... 4 in (102 mm)
Maximum Grading Angle ............... 107 degrees
Maximum Operating Height ............... 13 ft 8 in (4170 mm)
Lift Capacity at Maximum Height ............... 7166 lbs (3250 kg)
Breakout Force ............... 10600 lbs (4820 kg)
Loader Weight ............... 983 lbs (456 kg)

Loader Bucket

Width, in (mm) ............... 89.1 (2260)
Height, in (mm) ............... 29.8 (758)
Length, in (mm) ............... 32.1 (815)
Capacity (Struck), cu.ft (m3) ............... 23.3 (0.67)
Capacity (Heaped), cu.ft (m3) ............... 28.0 (0.80)
Weight, lb (kg) ............... 776 (352)

Cat 416C Backhoe Specifications

Dimensions and Performance Data (Standard Stick)

Maximum Digging Depth ............... 14 ft 6 in (4420 mm)
Digging Depth, 2 ft (610 mm) Flat Bottom ............... 14 ft 4 in (4379 mm)
Overall Operating Height at Full Lift ............... 17 ft 3 in (5269 mm)
Loading Height ............... 11 ft 5 in (3483 mm)
Reach From Swing Pivot at Ground Line ............... 18 ft 6 in (5639 mm)
Loading Reach ............... 5 ft 10 in (1764 mm)
Swing Arc ............... 180 degrees
Bucket Rotation (Vertical Wall Position) ............... 170 degrees
Bucket Rotation (Truck Loading Position) ............... 170 degrees
Stabilizer Spread (Operating Position) ............... 10 ft 7 in (3219 mm)
Stabilizer Spread (Transport Position) ............... 7 ft 9 in (2352 mm)
Digging Force (Bucket Cylinder) ............... 11700 lbs (5320 kg)
Digging Force (Crowd Cylinder) ............... 7704 lbs (3500 kg)

Dimensions and Performance Data (Extendable Stick)

Maximum Digging Depth ............... 18 ft 2 in (5545 mm)
Digging Depth, 2 ft (610 mm) Flat Bottom ............... 18 ft 1 in (5498 mm)
Overall Operating Height at Full Lift ............... 19 ft 5 in (5919 mm)
Loading Height ............... 13 ft 10 in (4223 mm)
Reach From Swing Pivot at Ground Line ............... 21 ft 11 in (6680 mm)
Loading Reach ............... 8 ft 11 in (2706 mm)
Swing Arc ............... 180 degrees
Bucket Rotation (Vertical Wall Position) ............... 165 degrees
Bucket Rotation (Truck Loading Position) ............... 165 degrees
Stabilizer Spread (Operating Position) ............... 10 ft 7 in (3219 mm)
Stabilizer Spread (Transport Position) ............... 7 ft 9 in (2352 mm)
Digging Force (Bucket Cylinder) ............... 12065 lbs (5485)
Digging Force (Crowd Cylinder) ............... 5635 lbs (2560)

Standard Material Buckets

Width, in (mm) ............... 12 (305)
Struck Capacity, cu.ft (m3) ............... 2.0 (0.06)
Heaped Capacity, cu.ft (m3) ............... 2.5 (0.07)
Number of Teeth ............... 3
Weight, lb (kg) ............... 243 (110)

Width, in (mm) ............... 18 (457)
Struck Capacity, cu.ft (m3) ............... 3.5 (0.10)
Heaped Capacity, cu.ft (m3) ............... 4.5 (0.14)
Number of Teeth ............... 4
Weight, lb (kg) ............... 287 (130)

Width, in (mm) ............... 24 (610)
Struck Capacity, cu.ft (m3) ............... 5.5 (0.16)
Heaped Capacity, cu.ft (m3) ............... 7.0 (0.20)
Number of Teeth ............... 5
Weight, lb (kg) ............... 330 (150)

Width, in (mm) ............... 30 (762)
Struck Capacity, cu.ft (m3) ............... 7.0 (0.20)
Heaped Capacity, cu.ft (m3) ............... 9.5 (0.26)
Number of Teeth ............... 5
Weight, lb (kg) ............... 364 (165)

Width, in (mm) ............... 36 (914)
Struck Capacity, cu.ft (m3) ............... 8.0 (0.23)
Heaped Capacity, cu.ft (m3) ............... 11.5 (0.31)
Number of Teeth ............... 6
Weight, lb (kg) ............... 397 (180)

High Capacity Buckets

Width, in (mm) ............... 18 (457)
Struck Capacity, cu.ft (m3) ............... 4.5 (0.13)
Heaped Capacity, cu.ft (m3) ............... 6.5 (0.18)
Number of Teeth ............... 4
Weight, lb (kg) ............... 342 (155)

Width, in (mm) ............... 24 (610)
Struck Capacity, cu.ft (m3) ............... 6.5 (0.18)
Heaped Capacity, cu.ft (m3) ............... 9.0 (0.22)
Number of Teeth ............... 4
Weight, lb (kg) ............... 395 (180)

Width, in (mm) ............... 30 (762)
Struck Capacity, cu.ft (m3) ............... 8.0 (0.23)
Heaped Capacity, cu.ft (m3) ............... 11.0 (0.31)
Number of Teeth ............... 5
Weight, lb (kg) ............... 440 (200)

Width, in (mm) ............... 36 (914)
Struck Capacity, cu.ft (m3) ............... 10.0 (0.28)
Heaped Capacity, cu.ft (m3) ............... 14.0 (0.39)
Number of Teeth ............... 6
Weight, lb (kg) ............... 474 (215)

________________________________________________________________________________

________________________________________________________________________________________

CATERPILLAR BACKHOE LOADERS SPECIFICATIONS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________