________________________________________________________________________________

International Harvester 385 Specifications

IH 385 Engine Technical Data

Engine Model ................. International Harvester D-155
Engine Type ................. 4-stroke, three-cylinder liquid-cooled diesel
Number of Cylinders ................. 3
Displacement, cu in (L) ................. 155 (2.50)
Engine Bore, in (mm) ................. 3.88 (98.0)
Engine Stroke, in (mm) ................. 4.38 (111.0)
Aspiration ................. Natural
Rated Engine Power, hp (kW) ................. 46.0 (34.3)
Rated Engine Speed, rpm ................. 2200
Idle Speed, rpm ................. 650-2400
Maximum Torque, Nm (ft-lbs) ................. 162 (119)
Torque Speed, rpm ................. 1650
Compression ................. 16:1
Fuel System ................. Direct injection
Fuel Tank Capacity, gal (L) ................. 20.0 (75.7)
Oil Capacity, qts (L) ................. 6.8 (6.4)
Coolant Capacity, qts (L) ................. 12.0 (11.4)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 45

Power Take-Off

PTO Operational Type ................. Independent
PTO Horsepower, hp (kW) ................. 35.0 (26.1)
PTO Clutch ................. Hydraulic wet disc
PTO Speeds, rpm ................. 540

International Harvester 385 Transmission

Transmission Type ................. Synchromesh
Gearbox Type ................. 8F/4R
Number of Forward Gears ................. 8
Number of Reverse Gears ................. 4
Clutch ................. Dry disc
Oil Capacity, qts (L) ................. 36.0 (34.1)
Maximum Forward Speed, mph (kph) ................. 16.7 (26.8)
Maximum Reverse Speed, mph (kph) ................. 5.2 (8.4)

Transmission Type ................. Power shuttle
Gearbox Type ................. 8F/8R
Number of Forward Gears ................. 8
Number of Reverse Gears ................. 8
Clutch ................. Dry disc
Maximum Forward Speed, mph (kph) ................. 15.0 (24.2)
Maximum Reverse Speed, mph (kph) ................. 18.9 (30.4)

IH 385 Wheels and Tires

Drive Wheels ................. 2WD 4x2
Steering Configuration ................. Front Steer
Steering System ................. Hydrostatic power
Brakes Type ................. Hydraulic wet disc
Front Tire Size (Standard) ................. 6.00-16
Rear Tire Size (Standard) ................. 13.6-28
Front Tire Size (Low-Profile) ................. 9.00-10
Rear Tire Size (Low-Profile) ................. 18.4-16.1

International Harvester 385 Hydraulic System

Hydraulic System Type ................. Open Center
Implement Pump Flow, gpm (Lpm) ................. 11.3 (42.8)
Steering Flow, gpm (Lpm) ................. 2.5 (9.5)
Hydraulic Capacity, gal (L) ................. 9.0 (34.1)
Hydraulic Pressure, Bar (psi) ................. 172 (2500)
Number of Standard Remote Valves ................. 0/2
3-Point Hitch Category ................. 2/1
Draft Sensing or Lift Control ................. Position and draft control

IH 385 Dimensions and Weight

Wheelbase (Standard), in (mm) ................. 79 (2000)
Wheelbase (Low-Profile), in (mm) ................. 78.2 (1980)
Length (Standard), in (mm) ................. 140 (3550)
Length (Low-Profile), in (mm) ................. 138 (3500)
Height (Steering Wheel), in (mm) ................. 61 (1540)
Height (ROPS), in (mm) ................. 93.5 (2370)
Overall Width (Standard), in (mm) ................. 73 (1850)
Overall Width (Low-Profile), in (mm) ................. 81 (2050)
Ground Clearance, in (mm) ................. 14.1 (350)
Weight (Standard), lb (kg) ................. 4930 (2235)
Weight (Low-Profile), lb (kg) ................. 4870 (2210)