________________________________________________________________________________

International Harvester 845 XL Technical Specifications

IH 845 XL Engine Data

Engine Model ................. International Harvester D-268
Engine Type ................. 4-stroke, 4-cylinder liquid-cooled diesel
Number of Cylinders ................. 4
Displacement, cu in (L) ................. 268 (4.40)
Engine Bore, in (mm) ................. 3.94 (100.0)
Engine Stroke, in (mm) ................. 5.50 (140.0)
Aspiration ................. Natural
Rated Engine Power, hp (kW) ................. 80.0 (59.7)
Rated Engine Speed, rpm ................. 2300
Maximum Torque, Nm (ft-lbs) ................. 296 (218)
Torque Speed, rpm ................. 1300
Compression ................. 16:1
Fuel System ................. Direct injection
Fuel Tank Capacity, gal (L) ................. 28.0 (106.0)
Oil Capacity, qts (L) ................. 12.7 (12.0)
Coolant Capacity, qts (L) ................. 20.4 (19.3)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 55

International 845XL Power Take-Off

PTO Operational Type ................. Independent
PTO Horsepower, hp (kW) ................. 66.3 (51.5)
PTO Clutch ................. Hydraulic
PTO Speeds, rpm ................. 540/1000

Transmission Configuration

Transmission Type ................. IH Total-Synchron
Gearbox Type ................. 16F/8R, fully synchronized
Number of Forward Gears ................. 16
Number of Reverse Gears ................. 8
Clutch ................. Dry disc
Maximum Forward Speed, mph (kph) ................. 18.0 (28.9)
Maximum Reverse Speed, mph (kph) ................. 10.8 (17.4)

IH 845 XL Wheels and Tires

Drive Wheels ................. 2WD/4WD
Steering Configuration ................. Front Steer
Steering System ................. Hydrostatic power
Brakes Type ................. Wet disc
Front Tire Size (2WD) ................. 11.0x16
Rear Tire Size (2WD) ................. 14.9x38
Front Tire Size (4WD) ................. 12.4x24
Rear Tire Size (4WD) ................. 14.9x38

International Harvester 845 XL Hydraulics and Hitch

Hydraulic System Type ................. Open Center
Implement Pump Flow, gpm (Lpm) ................. 7.9 (30.0)
Hydraulic Pressure, Bar (psi) ................. 167 (2420)
Number of Standard Remote Valves ................. 1/3
3-Point Hitch Category ................. 2
Draft Sensing or Lift Control ................. Lower link draft sensing
Standard Lift Capacity at lift pin, lb (kg) ................. 6945 (3150)

IH 845XL Dimensions and Weight

Wheelbase (2WD), in (mm) ................. 94.1 (2390)
Wheelbase (4WD), in (mm) ................. 92.8 (2350)
Length (2WD), in (mm) ................. 153.2 (3890)
Length (4WD), in (mm) ................. 156.3 (3970)
Height (Cab), in (mm) ................. 105.5 (2670)
Overall Width, in (mm) ................. 80.7 (2040)
Ground Clearance (2WD), in (mm) ................. 19.1 (480)
Ground Clearance (4WD), in (mm) ................. 15.9 (400)
Weight (2WD), lb (kg) ................. 7765 (3530)
Weight (4WD), lb (kg) ................. 8625 (3920)