________________________________________________________________________________

Case IH 4220 Technical Specifications

Case IH 4220 Engine Specs

Engine Model - Case D246
Engine Type - 4 stroke, four-cylinder diesel
Number of Cylinders - 4
Displacement, cu in (L) - 206 (3,38)
Engine Bore, in (mm) - 3,94 (100,0)
Engine Stroke, in (mm) - 5,06 (128,5)
Aspiration - Natural
Rated Engine Power, hp (kW) - 77,0 (57,4)
Rated Engine Speed, rpm - 2300
Maximum Torque, Nm (ft-lbs) - 256 (189,4)
Torque Speed, rpm - 1600
Fuel Tank Capacity, gal (L) - 35,7 (135,0)
Oil Capacity, qts (L) - 10,4 (9,8)
Coolant Capacity, qts (L) - 14,5 (13,7)
Electrical System Rating, Volts - 12

Case 4220 Power Take-Off

PTO Operational Type - Independent
PTO Horsepower, hp (kW) - 59,2 (44,2)
Clutch - Hydraulic wet disc
PTO Speeds, rpm - 540/1000

Transmission Configuration

Transmission Type (Std) - 8F/4R Synchromesh
Number of Forward Speeds - 8
Number of Reverse Speeds - 4
Clutch - Dry cerametallic disc
Clutch Disc Diameter, in (mm) - 11 (280)
Maximum Speed (Forward), mph (kph) - 15,7 (25,2)
Maximum Speed (Reverse), mph (kph) - 4,8 (7,9)
Transmission Type (Std) - 16F/8R Synchromesh Creeper
Number of Forward Speeds - 16
Number of Reverse Speeds - 8
Clutch - Dry cerametallic disc
Clutch Disc Diameter, in (mm) - 12 (300)
Maximum Forward Speed (Creeper), mph (kph) - 2,1 (3,4)
Maximum Reverse Speed (Creeper), mph (kph) - 0,7 (1,1)
Service Brake - Hydraulic wet disc

Case IH 4220 Wheels and Tires

Drive Wheels - 4WD 4x4
Steering Configuration - Front Steer
Steering System - Hydrostatic power
Front Tire Size - 12.4 R24
Rear Tire Size - 16.9 R34

Case 4220 Hydraulics and Hitch

Hydraulic System Type - Open center
Implement Pump Flow, gpm (Lpm) - 17,2 (65,0)
Hydraulic Pressure, Bar (psi) - 175 (2550)
3-Point Hitch Category - 2/3
Draft Sensing or Lift Control - Draft and position control
Standard Lift Capacity at lift pin, lb (kg) - 7700 (3500)

Case IH 4220 Dimensions and Weight

Wheelbase, in (mm) - 88,2 (2240)
Length, in (mm) - 148 (3750)
Height, in (mm) - 104 (2650)
Turning Radius, in (mm) - 157 (4000)
Weight, lb (kg) - 7480 (3400)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270