Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland T4050 Tractor Specs

Classification - Utility tractor

New Holland T-4050 Engine Specifications

Engine Model - New Holland F4C E9484M-J601 CNH
Engine Power, Rated, hp (kW) - 95 (70.8)
Type - 4 stroke Direct injection
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank, gal (L) - 21.6 (82)
Cylinders - 4
Displacement, cu in (L) - 274 (4.5)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged
Fuel System Description - Rotary-Distributor Type
Fuel System Control - Mechanical
Fuel Injection to combustion chamber - Direct
Fuel - diesel
Fuel tank - 88.00L / 23.25US gal
Emission Level - Tier 3
Exhaust Pipe - Vertical
Intercooled - Air cooled
Cooling System Fan Drive Type - Fixed
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

NH T4050 Transmission

Description - Mechanical Shuttle
Transmission Type - 4 Synchronized Speeds in 4 Ranges
Gearbox - Shuttle Command
Reversing gear - Mechanical
Forward / Reverse Speeds - 16F / 16R
Maximum Speed Forward, mph (kph) - 18.73 (30.14)
Creeper Range - No
Shuttle (Forward-Reverse) - Yes

Optional Transmission

Description - Dual Command
Transmission Type - with creeper 48x16
Forward / Reverse Speeds - 48F / 16R

New Holland T-4050 Tractor PTO

PTO Horsepower, hp (kW) - 80 (59.7)
Power Take Off Speeds, rpm - 540 / 1000
PTO Type - Independent

Wheels

Drive Wheels - 4WD
Steering - Front Steer
Steering system - Hydrostatic

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange
Axle Bar Diameter, in (mm) - No bar axle

Brakes

Brake Type - Wet Disc

New Holland T4050 Tractor Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Standard Pump Flow, gpm (Lpm) - 16.1 (61)
Optional Pump Flow, gpm (Lpm) - No option
Control type - Mechanical draft control (MDC)
Hydraulic pressure - 190.00Bar / 19.00Mpa
Standard Remote Valves - 1

3-Point Hitch Features

3-Point Hitch Category - Category 1 or 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Mechanical Lower Link Sensing
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,962 (1800)

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 2WD, in (mm) - 86.7 (2202)
Wheelbase, 4WD, in (mm) - 83.7 (2125)

Tire Size

Front Tire Size, 2WD - 9.5L x 15 - 6PR (F2)
Front Tire Size Width, 4WD - 11.2 x 24 (R1)
Rear Tire Size Width - 16.9 x 30 (R1)

New Holland T4050 Dimensions

Length - 3,580mm / 141Inch
Heigth - 2,332mm / 92Inch
Rollbar Up - 2,443mm / 96Inch
Rollbar Down - 1,930mm / 76Inch
Cab Height - 2,332mm / 92Inch
Ground clearance (Front axle) - 380mm / 15Inch

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________