Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

Case IH Farmall 75C Tractor Specs

Classification - Utility tractor

Case 75C Engine Specifications

Engine Make - FPT
Engine Model - 3.4 L
Number of Cylinders - 4
Advertised Engine Power, Rated, hp (kW) - 74 (55)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2300
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 23.8 (90)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Displacement, cu in (L) - 207 (3.4)
Engine Bore, in (mm) - 3.90 (99)
Engine Stroke, in (mm) - 4.33 (110)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Wastegate turbocharged
Fuel System Description - High Pressure Common Rail
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level, US EPA Tier - Tier 4B / Final
Exhaust Gas Recirculation (EGR) - Cooled EGR
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - Particulate Matter Catalyst
Exhaust Pipe, Vertical stack or Horizontal - Vertical stack
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

Case 75 C Farmall Transmission

Manufacturer's Description - 8x8 Mechanical Shuttle
Transmission Type - 4 Synchronized gears, 2 non-synch ranges
Number of Forward / Reverse Speeds - 8F x 8R
Maximum Speed Forward, mph (kph) - 20.1 (32.4)
Creeper Range Available - Yes
Shuttle (Forward-Reverse) Available - Yes

Optional Transmission 1

Manufacturer's Description - 8x8 Power Shuttle
Transmission Type - 4 Synchronized gears, 2 non-synch ranges
Number of Forward / Reverse Speeds - 8F x 8R

Optional Transmission 2

Manufacturer's Description - 12x12 Hydraulic Shuttle
Transmission Type - 4 Synchronized gears, 3 non-synch ranges
Number of Forward / Reverse Speeds - 12F x 12R

Case IH Farmall 75C Tractor PTO Performance

Power Take Off Horsepower - 65 (48.5)
PTO Speeds, rpm - 540 std; 540 / 540E opt.
PTO operational Type - Fully independent

Wheels

Drive Wheels - 2WD / 4WD
Steering Configuration - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Inboard Planetary
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle

Suspended Front Axle Available - No

Brakes

Service Brake Type - Wet Disc

Farmall 75 C Hydraulic System

Hydraulic System Type - Open Center
Main Hydraulic Pump Type - Gear
Implement Pump Flow, gpm (Lpm) - 12.5 (47.5)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1 std; 2 opt

Case IH Farmall 75C Tractor 3-Point Hitch

3-Point Hitch Category - Category 2/1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Top link sensing
Draft Link Ends Telescopic - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 3,664 (1662)
Standard Lift Capacity at lift pin, lb (kg) - 4,832 (2192)

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 2WD, in (mm) - 85.8 (2180)
Wheelbase, MFD/4WD or Track, in (mm) - 83.9 (2132)

Length

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 149 (3785)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 149 (3785)

Vertical Dimensions

Height to Top of Cab, in (mm) - 98 (2489)
Height to Top of ROPS raised, in (mm) - 101 (2565)

Farmall 75C Tractor Width w/Tires

Overall Width, with standard wheels or tracks, in (mm) - 83 (2108) across fenders

Weight (w/Tires)

Weight, 2WD w/ROPS, lb (kg) - 5,026 (2280)
Weight, MFD/4WD w/ROPS, lb (kg) - 5,952 (2700)
Weight, 2WD w/Cab, lb (kg) - 5,622 (2550)
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - 6,239 (2830)
Weight, Total allowable, w/maximum ballast, lb (kg) - 7,338 (3328)

Tire Size

Front Tire Size, 2WD - 7.50 x 16, 6 ply, F2
Front Tire Size orTrack Width, MFD/4WD or Track - 11.2 R24, R1W
Rear Tire Size or Track Width - 16.9 R30, R1W

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE IH FRONT END LOADERS SPECS
L103 L104 L105 L106 L107
L108 L130 L160 L300 L340
L350 L360 L530 L540 L545
L550 L555 L560 L565 L570
L575 L720 L730 L735 L740
L745 L750 L755 L760 L765
L770 L775 L780 L785 L795
90 890 2200 2250 LX156
 

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________