________________________________________________________________________________

Case IH MX100C Specifications

Case MX100C Engine Technical Data

Engine Model - Perkins 1004-4T
Engine Type - 4-stroke, direct injection, turbocharged diesel
Number of Cylinders - 4
Displacement, cu in (L) - 243,5 (4,0)
Engine Bore, in (mm) - 3,94 (100,0)
Engine Stroke, in (mm) - 5,00 (127,0)
Aspiration - Turbocharged
Rated Engine Power, hp (kW) - 102,0 (76,1)
Rated Engine Speed, rpm - 2200
Maximum Torque, Nm (ft-lbs) - 405 (299,7)
Torque Speed, rpm - 1400
Compression - 17.25:1
Firing Order - 1-3-4-2
Fuel System - Direct injection
Governor - Mechanical
Fuel Tank Capacity, gal (L) - 50,0 (190,0)
Oil Capacity, qts (L) - 9,3 (8,8)
Coolant Capacity, qts (L) - 16,6 (15,7)
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 95

Power Take-Off

PTO Operational Type - Independent
PTO Clutch - Electrically-actuated wet disc
PTO Horsepower, hp (kW) - 83,0 (61,9)
PTO Speeds, rpm - 540/1000
PTO / Engine Speeds, rpm - 540/1875, 1000/2210

Case IH MX 100 C Transmission

Transmission Type (Std) - 16F/12R, Partial powershift
Number of Forward Speeds - 16
Number of Reverse Speeds - 12
Clutch Type - Hydraulic wet discs
Transmission Type (Opt) - 32F/24R, Partial powershift with creeper
Number of Forward Speeds - 32
Number of Reverse Speeds - 24
Creeper - Standard
Maximum Forward Speed, mph (kph) - 23,0 (37,0)
Maximum Reverse Speed, mph (kph) - 13,7 (22,2)
Service Brake - Differential hydraulic wet disc

Case IH MX100C Wheels and Tires

Drive Wheels - 4WD 4x4
Steering Configuration - Front Steer
Steering System - Hydrostatic power
Front Tire Size - 14.9-24
Rear Tire Size - 16.9-38

Case MX 100 C Hydraulics and Hitch

Hydraulic System Type - PFC (Closed center pressure flow compensated)
Implement Pump Flow, gpm (Lpm) - 25,0 (94,6)
Hydraulic Pressure, Bar (psi) - 203 (2950)
Hydraulic Capacity, gal (L) - 17,5 (66,2)
Number of Standard Remote Valves - 2/4
3-Point Hitch Category - 2
Draft Sensing or Lift Control - Electronic lower-link
Standard Lift Capacity 24-in behind pin, lb (kg) - 8390 (3810)
Standard Lift Capacity at lift pin, lb (kg) - 12910 (5870)

Case MX100C Dimensions and Weight

Wheelbase, in (mm) - 95,4 (2420)
Length, in (mm) - 170,6 (4330)
Height, in (mm) - 110,3 (2800)
Turning Radius, in (mm) - 169 (4300)
Weight (Shipping), lb (kg) - 10450 (4750)
Weight (Operating), lb (kg) - 11180 (5080)

CASE IH TRACTORS TROUBLESHOOTING
585	695	885	895	1494
1594	2096	2294	4230	5120
5130	5140	5220	5230	7110
7120	7220	7240	CS110	CVX130
CVX170	CX100	CX90	Farmall 75C	Farmall 95
Farmall 110A	Farmall 140A	JX100	JXU105	Magnum 250
Magnum 305	Maxxum 125	MX110	MX135	MX270