________________________________________________________________________________
Case 580 SLE Backhoe Specs

Case 580 SLE Engine
Engine Make - Case
Engine Model - 4T-390/53
Displacement - 3920 cm3
Number of cylinders - 4
Bore and stroke - 102 x 120 mm
Injection system - Direct
Air filtration - Dry type. Dual element restriction indicator
Oil filtration - Replaceable, spin-on cartridge, full flow
Compression ratio - 17:1
SAE power rating - 54,4 kW-73 hp at 2200 rpm
EEC 80/1269 power rating - 53 kW-71 hp at 2200 rpm
DIN 6271 power rating - 53 kW-71 hp at 2200 rpm
ISO 9249 power rating - 53 kW-71 hp at 2200 rpm
Maximum torque EEC 80/1269 - 266 Nm from 1000 to 1600 rpm
Maximum torque DIN 6271 - 266 Nm from 1000 to 1600 rpm
Voltage - 12V
Battery - 1x12V-105 Amp/h
Alternator - 65 Amps
Case 580 Super LE Transmission
Transmission Type - Powershuttle
Torque converter - Single stage
Ratio - 3,24:1
Gearbox Model - Carraro
Gearbox Type - Mechnical with synchronised shifting
Gears - 4 forward speeds / 4 reverse speeds
Transmission disconnect switches are located on gear shift lever and
loader control lever.
Forward Speed, Km/h - 5.30-34.40
Reverse Speed, Km/h - 6.40-41.50
Case 580 SLE Axles
Rear Axle Type - Fixed, differential with efficient differential lock,
planetary rebuction gears in the wheel hubs, oil-bath disc brakes
Rear Axle Model - Carraro
Front axles 2WD Model - Case
Front axles 4WD Model - Carraro
Oscillation angle (2WD and 4WD) - 22 degrees
Tyres
2WD Front - 10,5/80x18-10 PR
2WD Rear - 16,5/85x28-10 PR
4WD Front - 12,5/80x18-10 PR
4WD Rear - 16,5/85x28-10 PR
Case 580 Super LE Steering and Brakes
Service brakes - Oil-bath disc brakes with individual braking on each
rear wheel.
Parking or safety brake - Oil-bath disc brake in sealed housing common
with that of the service brakes.
Hand-operated lever, located on the right-hand console.
Steering System - Load Sensing with steering system priority (flow as
per demand).
Type - Hydrostatic
Turning circle 2WD/4WD at corner of 4 in 1 bucket - 10.40 m / 10.22 m
Turning circle 2WD/4WD at outer edge of front tyre - 7.63 m / 7.50 m
(using brakes)
Steering cylinder - Double acting type
Gear pump - Common to hydraulic circuit.
Number of turns of steering wheel (lock to lock) 2WD/4WD - 2,7 / 3
Case 580 Super LE Hydraulic System
Type - Open centre, sectional type valve blocks
Pump Type - Crankshaft driven tandem gear pump
Pump Flow Capacity - 108 I/pm at 2200 rpm at 210 bar for loader
attachment, backhoe attachment and steering
Loader - sectional 3 spool valve. Single four-function lever control
with float position and automatic return to dig
Backhoe - sectional valve with 6 standard spools, 7th for optional
attachment
Regeneration type - Circuit (anti-cavitation)
Hydraulically cushioned end-of-stroke on swing cylinders
Dual four function lever operation for backhoe functions
Maximum operating pressure - 210 bar
Case 580 SLE Backhoe Specifications
Dig Depth (Std) - 14.5ft in/4419.6mm
Dig Depth (Ext) - 18.3ft in/5577.9mm
Reach From Swivel (Std) - 18.1ft in/5516.9mm
Reach From Swivel (Ext) - 21.1ft in/6431.3mm
Bucket Dig Force (Std) - 13126lb/5953.9kg
Bucket Dig Force (Ext) - 13126lb/5953.9kg
Load at Max Lift (Std) - 2395lb/1086.4kg
Load at Max Lift (Ext) - 1603lb/727.2kg
Load Height (Std) - 11.2ft in/3413.8mm
Load Height (Ext) - 13.3ft in/4053.9mm
Reach at Load Height (Std) - 8.9ft in/2712.8mm
Reach at Load Height (Ext) - 11.6ft in/3535.7mm
580 SLE Loader Specifications
Bucket Capacity - 1.1yd3/0.8m3
Bucket Width - 82in/2080mm
Bucket Breakout Force - 9667lb/43.1kN
Lift Capacity at Full Height - 6182lb/2804kg
Clearance at Max Dump Height - 8.1ft in/2468.9mm
Reach at Max Dump Height - 2.4ft in/703.6mm
Dig Depth - 5.9in/149mm
Capacities
Fuel Capacity - 31.4gal/118.9L
Hydraulic System Fluid Capacity - 33gal/125L
Cooling System Fluid Capacity - 4.4gal/16.5L
Transmission Fluid Capacity - 4.9gal/18.5L
Front Axle Fluid Capacity - 1.5gal/5.5L
Rear Axle Fluid Capacity - 3.8gal/14.2L
Dimensions
Front Wheel Tread Width - 67.5in/1714.5mm
Rear Wheel Tread Width (min) - 61.2in/1554.5mm
Transport Length - 22.7ft in/6919mm
Transport Width - 7.2ft in/2194.6mm
Transport Height - 19.2ft in/5852.2mm
Height to Top of Suspended Cab - 8.1ft in/2468.9mm
Wheelbase - 7ft in/2133.6mm
Ground Clearance - 1.3ft in/381mm
Operating Weight 4wd - 6025.1kg/13283lb
________________________________________________________________________________
| CASE BACKHOE LOADERS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________________
| CASE INDUSTRIAL TRACTORS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
580D
580SE
580L
580M
580N
310
480B
480C
480CK
480D
480E
530CK
580E
580SL
580SM
580SN
580ST
590ST
680CK
320 Wheel
380B
380CK
430CK
480LL
480E LL
480F LL
644
646
648