________________________________________________________________________________

Case 580SM Backhoe Specs

Case 580 Super M Engine

Engine Model - Case Family IV 445TA/E3 diesel, Tier III certified
Engine Type - 4-stroke, turbocharged
Cylinders - 4
Bore/Stroke - 4.09in x 5.19in (104x132 mm)
Displacement - 274 in3 (4.5 L)
Fuel injection - Direct high pressure common rail (HPCR)
Fuel - Diesel
Primary fuel filter - 5 micron
Secondary fuel filter - 30 micron w/water trap and indicating lamp
Air intake - Cross-flow
Cooling - Liquid
Engine speeds (rpm) Rated speed, full load - 2200
Engine speeds (rpm) Low idle - 900-1000
Engine speeds (rpm) High idle, no load - 2330-2430
Gross Horsepower - 97 (72 kW) @ 2200 rpm
Net Horsepower - 91 (68 kW) @ 2200 rpm
Gross Maximum torque @ 1400 rpm - 334 lb-ft (453 Nm)
Net Maximum torque @ 1400 rpm - 329 lb-ft (446 Nm)
Torque rise at rated speed - 45%
Fuel tank Capacity - 31.4 gal (119L)
Optional tank Capacity - 40.0 gal (151L)
Engine oil w/filter - 14.4 qt (13.6L)
Cooling system Capacity - 19.0 qt (18.0L)

Case 580 Super M Drivetrain

Transmission Type - 4-speed synchromesh with hydraulically actuated clutches and electric F/R shuttle control
Torque converter Ratio - 2.64
Differential lock - On-the-go push-button activation
Transmission 2WD Total system - 18.0 qt (17.0L)
Transmission 4WD Total system - 20.5 qt (19.4L)
Front axle Differential ratio - 2.0
Rear axle Differential ratio - 2.5
4WD Front axle Differential - 5.8 qt (5.5L)
Rear axle Differential and Planetaries - 14.4 qt (13.6L)
Service brakes - Individually applied, power assisted, hydraulically actuated, maintenance-free, self-adjusting, outboard mounted, wet disc, 2 per side
Disc area 384 in2 (.25 m2)
Parking brakes - Spring applied hydraulic release (SAHR)

580SM Tires

Front 2WD - 11Lx16.1, 10-ply rating
Front 4WD - 12x16.5, 8-ply rating
Rear 2WD /4WD - 17.5Lx24, 10-ply rating
Rear 2WD /4WD - 19.5Lx24, 10-ply rating

Case 580 Super M Hydraulics

Pump - Gear-type, transmission driven
Main relief pressure - 3050+50-50 psi @ 38.0 gpm (210+3-3 bar @ 144 L/min)
Filtration - 7-micron, full flow replaceable cartridge on return line, condition indicator light for filter
Oil cooler - Heavy-duty
Loader flow @ rated engine rpm - 28.5 gpm @ 3050 psi (108 L/min @ 210 bar)
Backhoe flow @ rated engine rpm - 38 gpm @ 3050 psi (144 L/min @ 210 bar)
Backhoe auxiliary hydraulics flow - 0 to 36 gpm (136 L/min)
Bi-Directional flow - 0 to 38 gpm (144 L/min) @ rated engine rpm
Hydraulic system Total - 29.5 gal (111.5L)
Total w/Extendahoe - 31.0 gal (117.2L)
Reservoir w/filter - 12.5 gal (47.1L)
Reservoir w/o filter - 12.0 gal (45.2L)

Case 580SM Loader Specifications

Loader Control - Single-lever control for lift and tilt
Self-leveling - Automatic
Loader Dump cylinders - Dual parallel
Standart Bucket Sizes (Width / Weight / Struck / Heaped) - 82 in (2.08 m) / 686 lb (311 kg) / 0.87 yd3 (0.67 m3) / 1.03 yd3 (0.79 m3)
4 in 1 Bucket Sizes (Width / Weight / Struck / Heaped) - 82 in (2.08 m) / 1462 lb (663 kg) / 0.85 yd3 (0.65 m3) / 1.04 yd3 (0.80 m3)
Overall operating height - 13 ft 11 in (4.25 m)
Height to Bucket hinge pin fully raised - 11 ft 2 in (3.4 m)
Height to Bucket hinge pin @ SAE carry - 13.1 in (334 mm)
Dump angle @ full height - 45 degrees
Dump clearance @ full height, 45 degrees dump Bucket - 8 ft 10 in (2.69 m)
Dump reach @ full height, 45 degrees dump Bucket - 30.0 in (763 mm)
Bucket rollback groundline/SAE carry - 40/45 degrees
Digging depth below grade Bucket flat - 5.9 in (149 mm)
Reach from front axle centerline bucket on ground - 77.6 in (1.97 m)
Lift capacity to full height - 6,182 lb (2805 kg)
Lift cylinders Breakout force - 9,165 lbf (40760 N)
Dump cylinders Breakout force - 9,481 lbf (42170 N)
Bucket cutting edge width - 82 in (2.08m)/93 in (2.36m)
Maximum grading angle - 116 degrees

Case 580SM Backhoe Specifications

Open-center hydraulics - Pro Control System
Backhoe Swing torque - 17, 940 lb-ft (24 370 Nm)
Wing stabilizers - w/cleated dirt pad
Standart Buckets Sizes (Width / Weight / Heaped) - 18 in (457 mm) / 255 lb (116 kg) / 4.7 ft3 (0.13 m3)
Universal Buckets Sizes (Width / Weight / Heaped) - 16 in (406 mm) / 346 lb (157 kg) / 3.60 ft3 (0.10 m3)
High Capacity Buckets Sizes (Width / Weight / Heaped) - 24 in (610 mm) / 450 lb (204 kg) / 8.50 ft3 (0.24 m3)
Maximum Digging depth - 14 ft 5 in (4.39 m)
Digging depth for 2 ft (610 mm) flat bottom - 14 ft 3 in (4.34 m)
Digging depth for 8 ft (2.44 m) flat bottom - 13 ft 4 in (4.06 m)
Overall reach from Rear axle centerline/Swing pivot - 21 ft 5 in (6.53 m) / 18 ft 1 in (5.51 m)
Loading height - 11 ft 2 in (3.40 m)
Loading reach dipper retracted - 8 ft 9 in (2.67 m)
Swing arc - 180 degrees
Bucket rotation - 164 degrees
Stabilizer spread operating - 9 ft 5 in (2.87 m)
Bucket cylinder Digging force - 12,821 lbf (57 031 N)
Dipper cylinder Digging force - 8,224 lbf (36 582 N)
Leveling angle maximum slope that backhoe will make vertical cut - 12 degrees

Case 580 Super M Dimensions

Overall transport length (4 in 1 Bucket) - 22 ft 8 in (6920 mm)
Overall transport width - 7 ft 2 in (2180 mm)
Height To top of canopy - 8 ft 9 in (2670 mm)
Height To top of cab - 8 ft 10 in (2690 mm)
Height To top of exhaust stack - 8 ft 6 in (2590 mm)
Transport Height - 10 ft 10 in (3290 mm)
Ground clearance at backhoe frame - 14.6 in (371 mm)
Angle of departure - 20 degrees
Front wheel tread 2WD - 67.5 in (1710 mm)
Front wheel tread 4WD - 67.7 in (1720 mm)
Width across tires 17.5Lx24 - 81.7 in (2074 mm)
Width across tires 19.5Lx24 - 81.4 in (2670 mm)
Wheelbase 2WD - 84 in (2130 mm)
Wheelbase 4WD - 84.5 in (2150 mm)
Turning Diameter 2WD, Brakes on / Brakes off - 21 ft 3 in (6.48 m) / 24 ft 8 in (7.52 m)
Turning Diameter 4WD engaged, Brakes on / Brakes off - 22 ft 1 in (6.72 m) / 28 ft 3 in (8.62 m)
Turning Diameter 4WD disengaged, Brakes on / Brakes off - 22 ft 0 in (6.70 m) / 25 ft 3 in (7.70 m)
Weight (Lightest Configuration) - 14,285 lb (6480 kg)
Weight (Heaviest Configuration) - 17,545 lb (7958 kg)