________________________________________________________________________________

John Deere 110 TLB Specs

JD 110TLB Engine Specifications

Manufacturer - Yanmar
Model Number - 4TNV88-MJTLB
Type - Diesel
Gross Horsepower - 32.1 kW (43.0 hp)
Estimated PTO Horsepower - 24.6 kW (33.0 hp)
Rated Engine Speed - 2600 rpm
Operating Range - 1050 - 2810 rpm
Displacement - 2.2 L (134 cu in.)
Cylinders - 4
Bore and Stroke - 88 x 90 mm (3.46 x 3.54 in.)
Compression Ratio - 19:1
Lubrication - Pressurized
Cooling System - Water Pump
Oil Filter - Spin On
Air Cleaner - Dry Type with Safety Element
Starting Aid - Air Pre-Heater
Electrical System Type - 12 Volt
Battery Size 650 Cold Cranking Amps at -18C (0F)
Alternator, Standard - 40 Amp
Alternator, Optional - 55 Amp
Starter Size - 2.0 kW (2.7 hp)
Fuel Filter - Replaceable Element
Fuel - Diesel
Fuel Pump In-Line with Electric Shutoff
Fuel Delivery - Direct Injection, Self Bleeding

John Deere 110 Backhoe Power Take-Off

Type - Independent
Clutch Type - Wet Disk
Brake Type - Wet Disk
Speed (Rear PTO rpm @ Rated Engine Speed) - 540 rpm

Drive Train

Transmission - Hydrostatic
Number Of Speeds - Infinite Forward, Infinite Reverse
Number Of Ranges - 3
Mechanical Front Wheel Drive - Standard
Capability for MFWD - All Ranges
Rear Final Drive Type - Inboard Planetary
Differential Lock - Ball, Ramp and Pin Type
Brakes Type - Wet Disk
Steering - Power, Cylinder-Assisted
Front Axle Operating Capacity - 2000 kg (4409 lb)
Rear Axle Operating Capacity - 2400 kg (5292 lb)
Drawbar Tongue Capacity - 255 kg (562 lb)

John Deere 110 TLB Hydraulic System and Hitch

Type of System Open Center
Power Steering - Standard
Main, Auxiliary and Steering Pump Type - Gear Pump
Working Pressure 20684 kPa (3000 psi)
Pump Capacity (Main) - 46.1 L/min (12.2 gpm)
Pump Capacity (Auxiliary) - 20.6 L/min (5.45 gpm)
Pump Capacity (Power Steering) - 22.6 L/min (6.0 gpm)
Total Flow of Pumps - 89.2 L/min (23.6 gpm)
Total Flow of Pumps available to Loader - 46.1 L/min (12.2 gpm)
Total Flow of Pumps available to Backhoe - 61.5 L/min (16.3 gpm)
Total Flow of Pumps available to Rockshaft - 15.5 L/min (4.1 gpm)
Hitch Type - Category 1
Lift Capacity (24-in. behind link arms) - 1134 kg (2500 lb)
Lift Capacity @ Lift Link Ends - 1419 kg (3130 lb)

Fluid Capacities

Fuel Tank - 58 L (15.3 gal)
Cooling System - 8.7 L (2.3 gal)
Crankcase w/ Filter - 4.9 L (5.0 qt)
Transmission and Hydraulic System - 37.0 L (9.7 gal)
Front Axle - 9 L (2.4 gal)

John Deere 110TLB Tires and Treads

Front Standard - 10x16.5 8PR R4 MARATHONER
Front Optional - 10x16.5 8PR R3 MIGHTY MOW
Rear Standard - 17.5Lx24 8PR R4
Rear Optional - 17.5Lx24 8PR R3 MIGHTY MOW
Front Tire Inflation Pressures (Loaded) 10x16.5 8PR R4 MARATHONER - 345 kPa (50 psi)
Front Tire Inflation Pressures (Loaded) 10x16.5 8PR R3 MIGHTY MOW - 345 kPa (50 psi)
Rear Tire Inflation Pressures (Loaded) 17.5Lx24 8PR R4 - 110 kPa (16 psi)
Rear Tire Inflation Pressures (Loaded) 17.5Lx24 8PR R3 MIGHTY MOW - 110 kPa (16 psi)

Steering

Minimum Turning Radius of Rear Inside Tire (2WD) - 1,3 m (53 in.)
Minimum Turning Radius of Rear Inside Tire (4WD) - 1,6 m (62 in.)
Curb Turning Radius with Brakes (2WD) - 3 m (117 in.)
Curb Turning Radius without Brakes (2WD) - 3,2 m (126 in.)
Curb Turning Radius with Brakes (4WD) - 3,1 m (124 in.)
Curb Turning Radius without Brakes (4WD) - 3,7 m (144 in.)
Bucket Clearance Circle with Brakes (Loader) - 4,7 m (186 in.)
Bucket Clearance Circle without Brakes (Loader) - 5 m (195 in.)
Bucket Clearance Circle with Brakes (Backhoe) - 4,2 m (164 in.)
Bucket Clearance Circle without Brakes (Backhoe) - 4,4 m (174 in.)

JD 110 TLB Dimensions

Overall Length - 7,5 m (296 in.)
Overall Width 2,2 m (86 in.)
Overall Height 2,6 m (101 in.)
Wheelbase 1,5 m (60 in.)
Weight Machine w/o Loader Bucket - 11,389 kg (5165 lb)

Loader Operating Dimensions

Maximum Lift Height to Pivot Pin - 2,9 m (115 in.)
Clearance with Bucket Level - 2,7 m (105 in.)
Clearance with Bucket Dumped - 2,2 m (88 in.)
Reach at Maximum Lift Height - 63.5 cm (25 in.)
Reach with Bucket on Ground - 1,9 m (73 in.)
Maximum Dump Angle - 45 degrees
Maximum Rollback Angle - 45 degrees
Digging Depth - 15 cm (6 in.)
Boom Inboard Taper Carrier to Mast - 15 cm (6 in.)
Overall Height in Carrying Position - 1,6 m (62 in.)
Overall Length (Boom) - 4,3 m (170 in.)
Overall Weight (Including Mast and Subframes) - 377 kg (833 lb)

John Deere 110 Backhoe Loader Performance

Lift Capacity to Maximum Height at Pivot Pin - 1237 kg (2727 lb)
Lift Capacity to Maximum Height - 926 kg (2042 lb)
Lift Capacity to 1.5 m (5 ft) at Pivot Point - 1421 kg (3133 lb)
Lift Capacity to 1.5 m (5 ft) - 1148 kg (2530 lb)
Breakout Force at Pivot Pin - 17.64 kN (3965 lb)
Breakout Force 500 mm (19.7 in.) Forward of Pivot Point - 13.94 kN (3133 lb)
Bucket Rollback Force at Maximum Height - 13.20 kN (2968 lb)
Bucket Rollback Force at 1.5 m (5 ft) Lift Height - 20.64 kN (4641 lb)
Bucket Rollback Force at Ground Level - 21.60 kN (4855 lb)
Loader Raising Time - 3.44 Seconds
Loader Lowering Time - 2.31 Seconds
Bucket Dumping Time Unloaded - 2.84 Seconds
Bucket Dumping Time Loaded - 0.93 Seconds
Bucket Rollback Time - 1.92 Seconds
Lift Capacity to Maximum Height - 1251 kg (2758 lb)
Breakout Force - 14.63 kN (3289 lb)

Loader Bucket Options

Bucket Width - 1,8 m (72 in.)
Bucket Depth - 69 cm (27.1 in.)
Bucket Height - 66 cm (25.8 in.)
Bucket Struck Capacity - 0.35 m3 (12.3 cu3)
Bucket Heaped Capacity - 0.45 m3 (16 cu3)
Operating Weight Standard Bucket - 179 kg (395 lb)
Operating Weight Heavy Duty Bucket - 204 kg (450 lb)

John Deere 110 TLB Backhoe Multi-Purpose Bucket

Bucket Width - 1,8 m (72 in.)
Bucket Depth - 64 cm (25.3 in.)
Bucket Height - 63 cm (24.7 in.)
Bucket Struck Capacity - 0.38 m3 (13.45 cu3)
Bucket Heaped Capacity - 0.46 m3 (16.4 cu3)
Operating Weight - 306 kg (675 lb)

Light Materials Bucket

Bucket Width - 2,1 m (84 in.)
Bucket Depth - 86 cm (33.8 in.)
Bucket Height - 70 cm (27.6 in.)
Bucket Struck Capacity - 0.55 m3 (19.5 cu3)
Bucket Heaped Capacity - 0.72 m3 (25.4 cu3)
Operating Weight - 236 kg (519 lb)

Pallet Frame and Forks

Frame Width - 1,1 m (45.3 in.)
Frame Height - 1 m (40 in.)
Overall Length (Frame and Forks) - 140 cm (55.3 in.)
Fork Thickness - 35 mm (1.4 in.)
Individual Fork Rating - 950 kg @ 500 mm (2094 lb @ 19.7 in.)
Operating Weight (Frame and Forks) - 180 kg (396 lb)
Lift Capacity at 24 in. Height - 1043 kg (2300 lb)
Lift Capacity at 48 in. Height - 952 kg (2100 lb)
Lift Capacity at Full Height - 725 kg (1600 lb)

John Deere 110TLB Backhoe Operating Dimensions

Maximum Digging Depth - 3,1 m (121 in.)
Digging Depth, 2 ft Flat Bottom - 3 m (119 in.)
Digging Depth, 8 ft Flat Bottom - 2,6 m (102.2 in.)
Truck Loading Height - 2,6 m (101.3 in.)
Truck Loading Reach from Swing Pivot - 1,7 m (65.1 in.)
Maximum Reach from Swing Pivot - 4,1 m (160 in.)
Operating Height Fully Raised - 4 m (158 in.)
Stabilizer Spread - Operating - 2,5 m (98 in.)
Stabilizer Overall Width -Transport - 1,7 m (66.1 in.)
Boom Swing Arc - 180 degrees
Backhoe Bucket Rotation - 190 degrees
Stabilizer Arm Leveling Angle - 12 degrees
Stabilizer Angle Rearward - 18 degrees
Backhoe Weight w/o Bucket - 795 kg (1754 lb)
Backhoe Operating Weight with 18 in. Bucket - 858 kg (1892 lb)

Backhoe Static Dimensions

Backhoe Transport Width w/ Stabilizers Retracted - 1,7 m (66.1 in.)
Backhoe Transport Length from Rear Axle Centerline - 2,6 m (100.7 in.)
Overall Transport Length - 6,2 m (245.5 in.)
Backhoe Transport Height - 2,7 m (107.3 in.)
Ground Clearance - 35.6 cm (14 in.)
Angle of Departure - 21 degrees

JD 110 TLB Backhoe Performance

Bucket Cylinder Digging Force - 25.46 kN (5723 lb)
Crowd Cylinder Digging Force - 16.74 kN (3764 lb)
Swing Torque - 10.8 kN (7966 lb)
Maximum Boom Lifting Capacity at Ground - 551 kg (1216 lb)
Stabilizer Lift Capacity at Ground - 4513 kg (9951 lb)

Backhoe Buckets (Pin-On Type)

12 Inch Type - Standard
Width - 30.5 cm (12 in.)
Volume - 0.037 m3 (1.3 ft3)

18 Inch Type - Standard
Width - 45.7 cm (18 in.)
Volume - 0.065 m3 (2.3 ft3)

24 Inch Type - Standard
Width - 61 cm (24 in.)
Volume - 0.093 m3 (3.3 ft3)

Backhoe Buckets (Quick Attach Type)

16 Inch Type - Heavy Duty
Width - 40.6 cm (16 in.)
Volume - 0.059 m3 (2.1 ft3)

20 Inch Type - Heavy Duty
Width - 51 cm (20 in.)
Volume - 0.079 m3 (2.8 ft3)

30 Inch Type - Ditching
Width - 76.2 cm (30 in.)
Volume - 0.125 m3 (4.4 ft3)

36 Inch Type - Ditching
Width - 91.4 cm (36 in.)
Volume - 0.153 m3 (5.4 ft3)