________________________________________________________________________________
John Deere 310C Backhoe Loader
John Deere 310C Engine
Engine Model ................. John Deere 4.276T
Engine Type ................. 4-Stroke, four-cylinder turbocharged diesel
Number of Cylinders ................. 4
Displacement, cu in (L) ................. 276 (4.50)
Engine Bore, in (mm) ................. 4.19 (106.0)
Engine Stroke, in (mm) ................. 5.00 (127.0)
Aspiration ................. Turbocharged
Rated Engine Power, hp (kW) ................. 75.0 (56.0)
Rated Engine Speed, rpm ................. 2200
Maximum Torque, Nm (ft-lb) ................. 301 (222)
Torque Speed, rpm................. 1300
Compression Ratio ................. 17.8:1
Firing Order ................. 1-3-4-2
Fuel System ................. Injection pump
Lubrication ................. Pressure system w/full-flow filter and cooler
Intake Valve Clearance, in (mm) ................. 0.014 (0.36)
Exhaust Valve Clearance, in (mm) ................. 0.018 (0.46)
Fuel Tank Capacity, gal (L) ................. 23.0 (87.0)
Oil Capacity, qts (L) ................. 9.0 (8.5)
Coolant Capacity, qts (L) ................. 16.0 (15.1)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 51/65
John Deere 310C Transmission
Transmission Type ................. Torque Converter
Gearbox Type ................. 4F/4R
Number of Forward Gears ................. 4
Number of Reverse Gears ................. 4
Clutch Type ................. Wet disc
Torque Converter Type .................. Single stage
Torque Converter Ratio .................. 2.83:1
Oil Capacity (2WD), qts (L) .................. 40.0 (37.9)
Oil Capacity (4WD), qts (L) .................. 46.0 (43.5)
Maximum Forward Speed, mph (kph) ................. 22.4 (36.0)
Maximum Reverse Speed, mph (kph) ................. 20.2 (32.5)
Wheels and Tires
Drive Wheels ................. 2WD/4WD
Steering Configuration ................. Front steer
Steering System ................. Hydrostatic power
Brakes Type ................. Hydraulic wet disc
Front Tire Size (Std) ................. 7.50-16
Rear Tire Size (Std) ................. 16.9-24
Front Tire Size (Opt) ................. 11L-15
Rear Tire Size (Opt) ................. 19.5L-24
Front Tread, in (mm) ................. 69 (1750)
Rear Tread, in (mm) ................. 62-70 (1575-1780)
JD 310C Hydraulic System
Hydraulic System Type ................. Open center
Implement Pump Type ................. Gear
Implement Pump Flow, gpm (Lpm) ................. 35.0 (132.0)
Hydraulic Pressure, Bar (psi) ................. 190 (2700)
Hydraulic Fluid Capacity, gal (L) ................. 21.0 (79.5)
Dimensions and Weight
Wheelbase, in (mm) ................. 82.7 (2100)
Length (w/Attachments), in (mm) ................. 281 (7130)
Height, in (mm) ................. 135 (3420)
Overall Width, in (mm) ................. 82 (2080)
Weight (w/Attachments), lb (kg) ................. 12400 (5625)
John Deere 310C Loader Specifications
Maximum Lift Height (to pin), in (mm) ................. 130 (3300)
Clearance, Dumped Bucket, in (mm) ................. 106 (2690)
Dump Reach, in (mm) ................. 28 (710)
Dump Angle, deg ................. 45
Rollback Angle, deg ................. 40
Breakout Force (at pin), lb (kg) ................. 8700 (3945)
Lift to Full Height (at pin), lb (kg) ................. 5600 (2540)
Bucket Width, in (mm) ................. 92 (2330)
Lift Cylinder Size, in (mm) .................. 3.15x29.8 (80x755)
Bucket Cylinder Size, in (mm) .................. 3.54x28.2 (90x715)
Raising Time to Full Height, second .................. 3.3
Bucket Dumping Time, second .................. 1.1
Lowering Time, second .................. 2.3
JD 310C Backhoe Specifications
Digging Depth (Standard), in (mm) .................. 171 (4340)
Digging Depth (Extendable Dipperstick, Retracted), in (mm) .................. 171 (4340)
Digging Depth (Extendable Dipperstick, Extended), in (mm) .................. 218 (5530)
2-ft Flat Digging Depth (Standard), in (mm) ................. 170 (4310)
2-ft Digging Depth (Extendable Dipperstick, Retracted), in (mm) .................. 170 (4310)
2-ft Digging Depth (Extendable Dipperstick, Extended), in (mm) .................. 216 (5480)
8-ft Flat Digging Depth (Standard), in (mm) ................. 156 (3960)
8-ft Digging Depth (Extendable Dipperstick, Retracted), in (mm) .................. 156 (3960)
8-ft Digging Depth (Extendable Dipperstick, Extended), in (mm) .................. 205 (5200)
Reach from Swing Pivot (Standard), in (mm) .................. 210 (5330)
Reach from Swing Pivot (Extendable Dipperstick, Retracted), in (mm) .................. 211 (5350)
Reach from Swing Pivot (Extendable Dipperstick, Extended), in (mm) ...... 253 (6420)
Loading Height (Standard), in (mm) .................. 130 (3300)
Loading Height (Extendable Dipperstick, Retracted), in (mm) .................. 133 (3370)
Loading Height (Extendable Dipperstick, Extended), in (mm) .................. 157 (3980)
Swing Arc, degrees .................. 180
Bucket Force (Standard), lb (kg) .................. 11570 (5250)
Bucket Force (Extendable Dipperstick, Retracted/Extended), lb (kg) .................. 11400 (5170)
Dipperstick Force (Standard), lb (kg) .................. 6650 (3015)
Dipperstick Force (Extendable Dipperstick, Retracted), lb (kg) .................. 6650 (3015)
Dipperstick Force (Extendable Dipperstick, Extended), lb (kg) .................. 4540 (2060)
Bucket Width, in (mm) .................. 12 (305)
Bucket Width, in (mm) .................. 16 (405)
Bucket Width, in (mm) .................. 18 (455)
Bucket Width, in (mm) .................. 24 (605)
Bucket Width, in (mm) .................. 30 (760)
Bucket Width, in (mm) .................. 36 (910)
Boom Cylinder Size, in (mm) .................. 4.53x34.8 (115x885)
Croud Cylinder Size, in (mm) .................. 3.94x32.2 (100x820)
Bucket Cylinder Size, in (mm) .................. 3.54x31 (90x790)
Swing Cylinder Size, in (mm) .................. 3.94x10.9 (100x278)
Stabilizer Cylinder Size, in (mm) .................. 3.54x16.9 (90x430)
Extendable Dipper Cylinder Size, in (mm) .................. 2.5x48 (63x1220)
________________________________________________________________________________
________________________________________________________________________________________
JOHN DEERE BACKHOE LOADERS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
JOHN DEERE INDUSTRIAL TRACTORS SPECIFICATIONS |
________________________________________________________________________________________
________________________________________________________________________________________