________________________________________________________________________________

John Deere 210LE Tractor Specifications

John Deere 210LE Engine

Engine Model ................. John Deere 4045D
Engine Type ................. 4-Stroke, four-cylinder water-cooled diesel
Number of Cylinders ................. 4
Displacement, cu in (L) ................. 276 (4.50)
Engine Bore, in (mm) ................. 4.19 (106.0)
Engine Stroke, in (mm) ................. 5.00 (127.0)
Aspiration ................. Naturally aspirated
Rated Engine Power, hp (kW) ................. 78.0 (58.2)
Rated Engine Speed, rpm ................. 2200
Maximum Torque, Nm (ft-lb) ................. 298 (220)
Torque Speed, rpm................. 1400
Compression Ratio ................. 17:1
Firing Order ................. 1-3-4-2
Fuel System ................. Injection pump
Lubrication System ................. Pressure system with spin-on filter and cooler
Air Cleaner ................. Dual-stage dry type
Emissions Level ................. Tier 2
Fuel Tank Capacity, gal (L) ................. 26.0 (98.5)
Oil Capacity, qts (L) ................. 9.0 (8.5)
Coolant Capacity, qts (L) ................. 17.2 (16.3)
Electrical System Rating, Volts ................. 12
Charging System ................. Alternator
Alternator Rating, Amps ................. 65

Power Take Off

PTO Operational Type ................. Independent
PTO Horsepower, hp (kW) ................. 60.0 (44.5)
PTO Speed, rpm ................. 540

John Deere 210LE Transmission

Transmission Type ................. Power Shuttle
Gearbox Type ................. 4F/4R, synchronized gears
Number of Forward Gears ................. 4
Number of Reverse Gears ................. 4
Torque Converter Type .................. Single stage
Torque Converter Ratio .................. 2.63:1
Oil Capacity, qts (L) .................. 15.0 (14.1)
Maximum Forward Speed, mph (kph) ................. 20.5 (33.0)
Maximum Reverse Speed, mph (kph) ................. 20.5 (33.0)

Transmission Type ................. Power Shift
Gearbox Type ................. 4F/3R, full power shift
Number of Forward Gears ................. 4
Number of Reverse Gears ................. 3
Torque Converter Type .................. Single stage
Torque Converter Ratio .................. 2.63:1
Oil Capacity, qts (L) .................. 15.0 (14.1)
Maximum Forward Speed, mph (kph) ................. 20.5 (33.0)
Maximum Reverse Speed, mph (kph) ................. 16.1 (25.9)

Wheels and Tires

Drive Wheels ................. 4WD 4x4
Steering Configuration ................. Front steer
Steering System ................. Hydrostatic power
Steering Cylinder Bore, in (mm) ................. 2.56 (65)
Steering Cylinder Stroke, in (mm) ................. 8.27 (210)
Steering Cylinder Rod, in (mm) ................. 1.42 (36)
Brakes Type ................. Hydraulic wet disc
Front Tire Size ................. 12-16.5
Rear Tire Size ................. 16.9-24

John Deere 210LE Hydraulic System

Hydraulic System Type ................. Open center
Hydraulic Pump Type ................. Gear type with integral priority valve
Implement Pump Flow (Loader and Hitch), gpm (Lpm) ................. 25.0 (94.5)
Hydraulic Pressure (Loader and Hitch), Bar (psi) ................. 190 (2750)
Hydraulic Fluid Capacity, gal (L) ................. 14.4 (54.5)

3-Point Hitch

Hitch Category ................. 2
Controlled Hydraulic Flow (Maximum), gpm (Lpm) ................. 10.0 (38.0)
Standard Lift Capacity 24-in (610mm) behind pin, lb (kg) ................. 3790 (1720)
Standard Lift Capacity at lift pin, lb (kg) ................. 6870 (3115)
Lift Cylinder Size, in (mm) ................. 3.00x8.0 (76x203)
Pitch Cylinder Size, in (mm) ................. 2.50x8.50 (63x216)
Tilt Cylinder Size, in (mm) ................. 3.00x4.75 (76x121)

Dimensions and Weight

Wheelbase, in (mm) ................. 83.3 (2110)
Length, in (mm) ................. 206 (5230)
Height (ROPS), in (mm) ................. 97.6 (2470)
Overall Width, in (mm) ................. 84 (2130)
Ground Clearance, in (mm) ................. 11.3 (280)
Weight (Shipping), lb (kg) ................. 9130 (4140)
Weight (Maximum), lb (kg) ................. 16000 (7255)

John Deere 210LE Loader Specifications

Maximum Lift Height (to pin), in (mm) ................. 136.7 (3470)
Clearance, Dumped Bucket, in (mm) ................. 100.6 (2550)
Reach At Full Height, in (mm) ................. 34.4 (870)
Dump Angle, deg ................. 45
Rollback Angle, deg ................. 44
Breakout Force (at pin), lb (kg) ................. 7900 (3585)
Lift to Full Height (at pin), lb (kg) ................. 5280 (2395)
Bucket Width, in (mm) ................. 86 (2180)
Bucket Capacity, cu.yd (m3) ................. 1.12 (0.86)
Bucket Weight, lb (kg) ................. 940 (426)
Boom Cylinder Size, in (mm) ................. 3.15x31.1 (80x790)
Bucket Cylinder Size, in (mm) ................. 3.54x29.3 (90x745)
Raising Time to Full Height, second .................. 5.2
Bucket Dumping Time, second .................. 1.5
Lowering Time, second .................. 2.4