Specifications, Service and Repair of Farm and Lawn Tractors

________________________________________________________________________________

New Holland T6070 Elite Tractor Specs

Classification - Row Crop tractor

New Holland T6070 Engine Specifications

Engine Model - New Holland NEF 667TA
Engine Power, Rated, hp (kW) - 140 (104.4)
Maximum Engine Power, hp (kW) - 165 (123)
Rated Engine Speed, rpm - 2200
Power Boost, hp (kW) - 25 (19)
Fuel Tank, gal (L) - 79.3 (300)
Cylinders - 6 (4 valve per cylinder)
Displacement, cu in (L) - 411 (6.7)
Engine Bore, in (mm) - 4.095 (104)
Engine Stroke, in (mm) - 5.20 (132)
Block Design, Replaceable Liners - Parent bore
Aspiration, Turbocharged or Naturally Aspirated - Turbocharged / air-to-air intercooled
Fuel System Description - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Viscous
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120

NH T6070 Transmission

Description - 18F / 6R Power Command
Transmission Type - Full Powershift
Gearbox - Electro Command
Reversing gear - Hydraulic
Forward / Reverse Speeds - 18F / 6R
Maximum Speed Forward, mph (kph) - 23.2 (37.3)
Creeper Range - Yes
Shuttle (Forward-Reverse) - Yes
Maximum speed - 40.00km/h / 24.85mph
Creeper - 0.23km/h / 0.14mph

Optional Transmission

Description - 19 x 6 Power Command, 31 mph (50 Kph)
Transmission Type - NH - Multi-disc
Forward / Reverse Speeds - 19F / 6R

New Holland T-6070 Tractor PTO

Power Take Off Horsepower, hp (kW) - 120 (90)
PTO Speeds, rpm - 540 / 1000
PTO Type - Independent
Engine at PTO speed - 1969/1546/2120rpm

Wheels and Steer

Drive Wheels - 4WD
Steering - Front Steer std; SuperSteer opt
Steering System - Hydrostatic

Rear Axle

Final Drive - Planetary / Inboard
Axle Output End - Flange / bar Optional
Axle Bar Diameter, in (mm) - 3.6 (92)
Suspended Front Axle - Yes, Opt.

Brakes

Brake Type - Wet disc

New Holland T-6070 Tractor Hydraulic System

Hydraulic System Type - Closed Center Load Sensing
Main Hydraulic Pump Type - Variable Displacement
Standard Pump Flow, gpm (Lpm) - 26.5 (100.3)
Optional Pump Flow, gpm (Lpm) - No option
Hydraulic pressure - 210.00Bar / 21.00Mpa
Control type - Electro-hydraulic controls
Standard Remote Valves - 2 Mechanical or 2 Electronic

NH T6070 3-Point Hitch Features

3-Point Hitch Category - Category 2
Optional Hitch Category - No option
Draft Sensing or Lift Control - Bosch Lower Link Electronic(EDC)
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 12,185 (5527)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No Option
Optional Lift Capacity at lift pin, lb (kg) - No Option

Drawbar

Drawbar Description - Swinging

Wheelbase

Wheelbase, 4WD, in (mm) - 107.8 (2739) std; 113.8 (2891) SuperSteer

Tire Size

Front Tire Size Width, 4WD - 14.9R28
Rear Tire Size Width - 18.4R38

Dimensions and weight

Length - 5,122mm / 202Inch
Width - 2,280mm / 90Inch
Heigth - 2,925mm / 115Inch
Total weight - 9,000kg / 19,800Lbs

________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________