________________________________________________________________________________

Kubota B2410 Specs

D1105 Engine Specifications

Model - Kubota D1105
Type - diesel, 3-cylinder, liquid-cooled 68.5 ci (1.1 L)
Bore/Stroke - 3.07x3.09 inches (78 x 78 mm)
Power (gross) - 24 hp (17.9 kW)
Fuel system - indirect injection
Rated RPM - 2600
Torque - 50 lb-ft (67.8 Nm)
Starter volts - 12
Oil capacity - 3.2 qts (3.0 L)
Coolant capacity - 4 qts (3.8 L)
Capacity Fuel - 6.3 gal (23.8 L)
Electrical Ground - negative
Battery Number - 1
Cold-cranking amps - 433

Kubota B2410 Transmission

Type - hydrostatic
Gears - infinite forward and reverse
Oil capacity - 13.2 qts (12.5 L)

Power Take-off

Rear PTO - live
Rear RPM - 540 (1.375)
Engine RPM - 540/2600
Mid RPM - 2500
Engine RPM - 2500/2578
PTO (claimed) - 18 hp (13.4 kW)

Mechanical

Chassis - 4x2 2WD / 4x4 MFWD 4WD (optional)
Steering - power
Brakes - wet disc
Cab - Two-post ROPS

Kubota B2410 Hydraulics

Type - open
Valves - 2
Pump flow - 4.4 gpm (16.7 lpm)
Steering flow - 2.6 gpm (9.8 lpm)

3-Point Hitch

Rear Type - I
Control - position control
Rear lift (at ends) - 1655 lbs (750 kg)
Rear lift (at 24"/610mm) - 1,300 lbs (589 kg)

Dimensions and Tires

Ag front Tires - 6.50-10 (2WD) / 7-12 (4WD)
Ag rear Tires - 11.2-16
2WD Weight - 1,367 lbs (620 kg)
4WD Weight - 1,477 lbs (669 kg)
HSDB Weight - 1,500 lbs (680 kg)
Wheelbase - 59 inches (149 cm)
Length - 91.7 inches (232 cm)
Width - 46.3 inches (117 cm)
Height (steering wheel) - 53.2 inches (135 cm)
Height (ROPS) - 77.4 inches (196 cm)
Ground clearance - 12.8 inches (32 cm) / 11.2 inches (28 cm) (HSDB)
2WD 35.4 inches (89 cm) / 4WD Front tread - 32.9 inches (83 cm)
Rear tread - 35 to 41.9 inches (88 to 106 cm)

Kubota B2410 Attachments

Snowblower

Overall length - 113.0 in. (2870 mm)
Overall width - 50.2 in. (1275 mm)
Overall height - 37.0 in. (940 mm) with chute
Cutting width; in. (mm) - 48.75 in. (1238 mm)
Cutting height - 19.1 in. (486 mm)
Reach from centreline of front axle to scaper blade - 37.0 in. (940 mm)
Reach from centreline of front axle to auger shaft - 39.0 in. (991 mm)
Impeller diameter - 16.0 in. (406 mm)
Impeller housing width - 5.5 in. (140 mm)
Auger diameter - 12.88 in. (327 mm)
Auger height - 14.0 in. (356 mm)
Auger clearance from ground - 1.38 in. (35 mm)
Lift height above ground level - 7.88 in. (200 mm)
Weight - 200 lbs. (91 Kg)
Number of phases - 2
Primary - Drive PTO
Auger diameter - 12.88 in. (327 mm)
Auger pitch - 15.0 in. (381 mm)
Impeller diameter - 16.0 in. (406 mm)
Number of blades on impeller - 3
Chute position - Right
Chute rotation - Manual, Electric or Hydraulic
Chute rotation - 225 degrees
Discharge chute - 6.0 in. (152 mm)
Adjustable chute deflector - Manual or Electric Option
Adjustable rear skid shoes - Yes
Replaceable cutting edge - Yes
Hitch system - Quick hitch category