________________________________________________________________________________

Kubota B2601 Specs

Kubota D1105 Engine Specifications

Engine Model - Kubota D1105-E4D32
Number of Cylinders - 3
Displacement, cu in (L) - 68.5 (1.123)
Engine Bore, in (mm) - 3.07 (78)
Engine Stroke, in (mm) - 3.09 (78.4)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Naturally aspirated
Fuel System Description - In-Line Pump System
Fuel System Control, Electronic or Mechanical - Mechanical
Fuel Injection to combustion chamber, Direct or Indirect - Indirect
Emission Level, US EPA Tier - Tier 4
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - No
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - No
Diesel Particulate Filter (DPF) - No
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 14,5
Alternator Rating, Amps - np
Advertised Engine Power, Rated, hp (kW) - 25.5 (19)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2800
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 6.1 (23)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

Power Take-off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 19.5 (14.5)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Independent

Kubota B2601 Transmission

Manufacturer's Description - 3-range HST
Transmission Type - Hydrostatic
Number of Forward / Reverse Speeds - Infinite, 3 ranges
Maximum Speed Forward, mph (kph) - 12.7 (20.4)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - No

Wheel Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

Kubota B2601 Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Dual pump
Implement Pump Flow, gpm (Lpm) - 4.7 (18)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 2 optional

3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position Control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,411 (640)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,808 (820)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Extendable

Wheelbase

Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 61.4 (1560)

Kubota B2601 Dimensions

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 94.9 (2410)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - 85 (2160)
Overall Width, with standard wheels or tracks, in (mm) - 49 (1245) minimum

Weight

Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 1,632 (740)
Weight, 2WD w/Cab, lb (kg) - No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - np

Tires

Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 7-12, R1
Rear Tire Size or Track Width - 11.2-16, R1