________________________________________________________________________________

Kubota B2710 Specs

Kubota V1305 Engine Specifications

Engine Model - Kubota V1305-D18
Type Indirect Injection - Vertical, water-cooled, 4-cycle diesel
Number of cylinder - 4
Bore and stroke - 76x73.6 mm (2.99x2.90 in.)
Total displacement - 1335 cm3 (81.5 cu.in.)
Engine power (ECE-R24) - 18.2 kW (24.7 PS)
Engine power (SAE gross) - 20.1 kW (27.0 HP)
Rated revolution - 43.3 r/s (2600 rpm)
Maximum torque - 79 Nm (59 ft-lbs)
Battery - 12 V, RC 79 min, CCA 433 A
Starting system - Electric starting with cell starter 12 V, 1.4 kW
Lubricating system - Forced lubrication by trochoidal pump
Cooling system - Pressurized radiator, forced circulation with water pump
Fuel Diesel fuel No. 2-D above 10C (14F), Diesel fuel No. 1 below 10C (14F)

Kubota B2710 Power Take-off

Rear PTO shaft - SAE 1-3/8, 6 splines
Revolution - 1 speed (540 rpm at 2600 engine rpm)
Mid. PTO shaft - USA No. 5 (KUBOTA 10-tooth) involute spline
Revolution - 1 speed (2500 rpm at 2578 engine rpm)

Capacities

Fuel tank - 26 L (6.9 U.S.gals., 5.7 Imp.gals.)
Engine crankcase (with filter) - 4.1 L (4.3 U.S.qts., 3.6 Imp.qts.)
Engine coolant - 4.5 L (4.8 U.S.qts., 4.0 Imp.qts.)
Transmission case - 15.5 L (4.10 U.S.gals., 3.41 Imp.gals.)
Front axle case - 5.3 L (5.6 U.S.qts., 4.7 Imp.qts.)

Kubota B2710 Tires

Front - 7-12 (180 / 85D12)
Rear - 12.4 -16

Dimensions

Overall length (with 3P) - 2625 mm (103.3 in.)
Overall width (min. tread) - 1365 mm (53.7 in.)
Overall height (with ROPS) - 2334 mm (91.9 in.)
Overall height (top of steering wheel) - 1375 mm (54.1 in.)
Wheel base - 1666 mm (65.6 in.)
Minimum ground clearance - 308 mm (12.1 in.)
Front Tread - 935 mm (36.8 in.)
Rear Tread - 1050 mm (41.3 in.)
Weight (with ROPS) - 842 kg (1857 lbs)

Kubota B2710 Mechanical

Minimum turning radius 4WD with brake - 2.1 m (6.9 feet)
Minimum turning radius Bi-speed turn without brake - 2.1 m (6.9 feet)
Clutch - Dry single plate
Steering - Integral type power steering
Transmission - Hydrostatic transmission with 3 speeds range gear shift
Brake - Wet disk type
Differential - Bevel gears

Hydraulic system

Hydraulic control system - Position control
Pump capacity 3P - 24.4 L/min. (6.4 U.S.gals./min., 5.4 Imp.gals./min.)
Power steering - 11.7 L/min. (3.1 U.S.gals./min., 2.6 Imp.gals./min.)
Three point hitch - SAE Category I
Max. lift force at lift points - 830 kg (1830 lbs)
Max. lift force 24 in. behind lift points - 650 kg (1433 lbs)