________________________________________________________________________________

Kubota L3301 Specs

Kubota D1803 Engine Specifications

Engine Model - Kubota D1803-CR-E4
Number of Cylinders - 3
Displacement, cu in (L) - 111.4 (1.826)
Engine Bore, in (mm) - 3.425 (87)
Engine Stroke, in (mm) - 4.032 (102.4)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Natural
Fuel System Description - Common Rail System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - EGR standard
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 40
Advertised Engine Power, Rated, hp (kW) - 33 (24.6)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - 2700
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 11.1 (42)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF

Power Take-off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 27.7 / 26.2 (20.7 / 19.5)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Trans. driven std; Live w/HST

Kubota L3301 Basic Transmission

Manufacturer's Description - Synchro-Shuttle
Transmission Type - Mechanical, 4 main-shift, 2 range-shift
Number of Forward / Reverse Speeds - 8F/ 8R
Maximum Speed Forward, mph (kph) - 13.2 (21.2)
Creeper Range Available - No
Shuttle (Forward-Reverse) Available - Standard

Optional Transmission

Manufacturer's Description - HST Hydrostatic
Transmission Type - Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds - Infinite, 3 ranges

Wheel or Track Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 2WD / 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Kubota L3301 Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Single gear-type
Implement Pump Flow, gpm (Lpm) - 6.3 (23.9)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1, 2, or 3 optional

Kubota L3301 3-Point Hitch

3-Point Hitch Category - Category 1
Optional Hitch Category - No option
Draft Sensing or Lift Control - Position control
Draft Link Ends Telescopic - No
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 1,433 (650)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - 1,985 (900)
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Extendable

Wheelbase

Wheelbase, 2WD, in (mm) - 63.3 (1610)
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 63.3 (1610)

Dimensions

Length, 2WD, incl. Hitch/Drawbar, in (mm) - 110.6 (2810)
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 107.9 (2740)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - 91.7 (2330)
Overall Width, with standard wheels or tracks, in (mm) - 55.1 (1400)

Weight

Weight, 2WD w/ROPS, lb (kg) - 2,557 (1160)
Weight, MFD/4WD w/ROPS, lb (kg) - 2,778 (1260)
Weight, 2WD w/Cab, lb (kg) - No cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - 3,423 (1553)

Tires

Front Tire Size, 2WD - 5.00-15, R1
Front Tire Size orTrack Width, MFD/4WD or Track - 7.2-16, R1
Rear Tire Size or Track Width - 11.2-24, R1