________________________________________________________________________________

Kubota MX5800 Specs

Engine Specifications

Advertised Engine Power, Rated, hp (kW) - 61.4 (45.8)
Maximum Engine Power, hp (kW) - Same as advertised
Rated Engine Speed, rpm - np
Power Boost, hp (kW) - No boost
Fuel Tank capacity, gal (L) - 13.5 (51)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) - No DEF
Engine Model - Kubota V2403-CR-T
Number of Cylinders - 4
Displacement, cu in (L) - 148.5 (2.434)
Engine Bore, in (mm) - 3.425 (87)
Engine Stroke, in (mm) - 4.032 (102.4)
Block Design, Replaceable Liners - Parent bore block
Aspiration, Turbocharged or Naturally Aspirated - Wastegate turbocharged
Fuel System Description - Common Rail System
Fuel System Control, Electronic or Mechanical - Electronic
Fuel Injection to combustion chamber, Direct or Indirect - Direct
Emission Level, US EPA Tier - Tier 4 Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) - No
Exhaust Gas Recirculation (EGR) - EGR standard
Cleanup Catalyst (CUC) - No
Diesel Oxidation Catalyst (DOC) - DOC standard
Diesel Particulate Filter (DPF) - DPF standard
Exhaust Pipe, Vertical stack or Horizontal - Horizontal
Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 45

Power Take-off

PTO Horsepower, Basic / Optional Transmission, hp (kW) - 50.2 (37.5)
PTO Speeds, rpm - 540
PTO operational Type (Independent; Live; Continuous) - Live-independent

Kubota MX5800 Transmission Configuration

Manufacturer's Description - HST Hydrostatic
Transmission Type - Hydrostatic, 3 ranges
Number of Forward / Reverse Speeds - Infinite, 3 ranges
Maximum Speed Forward, mph (kph) - 16.1 (25.9)
Creeper Range Available - Yes, hydrostatic
Shuttle (Forward-Reverse) Available - Standard

Wheel Configuration

Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks - 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer - Front Steer

Rear Axle Assembly

Final Drive Location and Description - Spur gear
Axle Output End, Flange or Bar - Flange
Axle Bar Diameter, in (mm) - No bar axle

Front Axle and Brakes

Suspended Front Axle Available - No
Service Brake Type - Wet disc

Hydraulic System

Hydraulic System Type - Open center
Main Hydraulic Pump Type - Tandem gear-type
Implement Pump Flow, gpm (Lpm) - 9.5 (35.8)
Optional Pump Flow, gpm (Lpm) - No option
Number of Standard Remote Valves - 1, 2, or 3 optional

Kubota MX5800 3-Point Hitch

3-Point Hitch Category - Category 2
Optional Hitch Category - Convertible to Category 1
Draft Sensing or Lift Control - Position std; Draft opt.
Draft Link Ends Telescopic - Standard -
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 2,310 (1050)
Optional Lift Capacity 24 Inches behind pin, lb (kg) - No option
Standard Lift Capacity at lift pin, lb (kg) - np
Optional Lift Capacity at lift pin, lb (kg) - No option
Drawbar Description - Extendable

Wheelbase

Wheelbase, 2WD, in (mm) - No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) - 74.6 (1895)

Kubota MX5800 Dimensions

Length, 2WD, incl. Hitch/Drawbar, in (mm) - No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) - 125.2 (3180)
Height to Top of Cab, in (mm) - No cab
Height to Top of ROPS raised, in (mm) - 95.7 (2430) -
Overall Width, with standard wheels or tracks, in (mm) - 69.7 (1770)

Weight

Weight, 2WD w/ROPS, lb (kg) - No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) - 3,734 (1694)
Weight, 2WD w/Cab, lb (kg) - No 2WD; No cab
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) - No cab
Weight, Total allowable, w/maximum ballast, lb (kg) - np

Tires

Front Tire Size, 2WD - No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track - 9.5-16, R1
Rear Tire Size or Track Width - 14.9-26, R1