________________________________________________________________________________

Massey Ferguson 5475 Specs

Engine Specifications

Engine - SISU 44 DTA
No. of cylinders - 4
Bore, mm - 108
Stroke, mm - 120
Cubic capacity, L - 4.4
Compression ratio - 17.25/1
Compression pressure (kPa) - 2000/3500
Permissible compression deviation between cylinders (kPa) - 350
Output at 2200 rpm (kw) - 116 (86.5)
Maximum torque (Nm/lbf.ft) - 540
At speed (rpm) - 1400
Idle speed - 950
Nominal speed - 2200
Maximum speed at no load - 2385 +/-30
Injection pump type - Lucas DP210
Rotation - Clockwise
Static timing angle (degrees) - 4
Engine position - TDC
Engine check angle (degrees) - pin
Pump check angle (degrees) - pin
Firing order - 1, 2, 4, 3
Injectors - Bosch
New and servicing setting (bar) - 278
Aspiration system - Turbo, Wastegate, Intercooler air/air
Type - Garrett GT35
Valve spring - single
Valve seat insert (inlet/exhaust) - yes
Valve angle, degrees - 0.46/0.31
Inlet/exhaust valve clearance (mm) - 0.35/0.35
Oil cooler - yes
No. of thermostats - 1
Opening temperature (start/full) - 79C/83C
Piston cooling nozzle - yes
Oil filter - one
Fuel filter - one (+1 prefilter)

MF 5475 Transmission and Clutch

Transmission model - Dyna-4
Type - Powershuttle with 4-Speed Powershift
Power Shuttle - Left Side of Steering Wheel
Speeds - 16 Forward, 16 Reverse
Gears - 4 Powershift
Ranges - 4 Synchromesh and Multi-Disk Wet Clutch, Electronic Controlled Hydraulic Shuttle
Creeper - Optional, 4:1 Reduction / Optional, 9:1 Reduction
Clutch - Dyna-4 Transmission Tractors Multi-Plate Clutch Pack, Oil Cooled
Clutch Pack Diameter in (mm) - 6.79 (172.5)
Number of Discs - 5
Control - Foot Pedal and Modulating Valve
Actuation - Hydraulic
Free Play Adjustment - Self Adjusting
Type - Inching Pedal, Electronic Transmission Control

Massey Ferguson 5475 Power Take Off (PTO)

Type - Independent
Speeds (rpm) - 540/1000
Optional Speeds - Economy
Control - Electro-Hydraulic
Clutch - Wet, Multi-Disc
Clutch Disc Diameter in (mm) - 5.31 (135)
Shaft 540 RPM - 6 Spline, 1.375 in. (35)
Shaft 1000 RPM - 21 Spline, 1.375 in. (35)
Engine/PTO Speed Ratio 540 RPM - 1990
Engine/PTO Speed Ratio 1000 RPM - 2090

MF 5475 Rear Axle

Rear Axle Type - Flanged Axle
Differential and Final Drive Type 1 Primary Reduction - Spiral Hypoid Pinion and Ring Gear on Differential
Differential and Final Drive Type 1 - Secondary Reduction Inboard Planetaries
Differential Lock Type - Sliding Collar, Engage On the Go
Final Drive - Inboard Planetary
Engagment - Electro-Hydraulic
Rear Brakes - Inboard Wet Disc
Actuation Brakes - Hydraulic
Parking Brake - Hand Operated Lever, Multi-Disc, on Pinion
Axle Length - 71 (1800)
Tread Settings Min/Max, in (mm) - 60.2 (1530)/84.4 (2144)
Maximum Permissible Rear Tire Rolling Circumference - 207(5258)
Maximum Permissible Static Axle Load Limit lb (kg) - 11,905 (5400)

Massey Ferguson 5475 Front Axle

Front Axle (2WD) - Telescopic, Box-In-Box Design
Steering angle - 55 degrees
Tread Settings Adjustable Increments in (mm) - 3.94 (100)
Wheel (10.00x16 Tire) Turned In in (mm) - 64.1 (1629)/79.9 (2029)
Wheel (10.00x16 Tire) Turned Out in (mm) - 67.2 (1707)/83 (2107)
Maximum Permissible Axle Static Load Limit lb (kg) - 6614 (3000)
Front Axle (4WD) Type - Center Pivot, Mechanical Drive, Dana 735
Steering Angle - 55 degrees
Drive - Centerline Splined Shaft
Drive Ratio - 1.363 below 18.4R34 / 1.335 above 18.4R34
Method of Engagement - Electro-Hydraulic, Wet, Multi-Disc Clutch
Differential Lock - Electro-Hydraulic, Simultaneous with Rear Axle
Tread Settings in (mm) - 61.7 (1567)/80.8 (2053)
Maximum Permissible Tire Size - 14.9 R28
Maximum Permissible Axle Static Load Limit lb (kg) - 6614 (3000)

MF 5475 Hydraulic System

Basic Type - Open Center
Drive - PTO Shaft
Flow remotes gpm (lpm) (2200 erpm) - 15.0 (57)
Pressure psi (bar) - 2700 (186)
Remote Valves Standard (optional) - 2 (3, 4)
Optional Type - Combined Flow System
Drive - PTO Shaft
Flow Remotes gpm (lpm) (2200 erpm) - 26.0 (100)
Pressure psi (bar) - 3050 (210)
Remote Valves Standard (optional) - 2 (3, 4)
Filters - 2
Type - External Suction Strainer and Canister Filter
Remote Auxiliary Hydraulic Valves Number - 2 Standard, 3 / 4 Optional

Three Point Hitch

Hitch Category - 2 / 3N
Hitch Lower Links - Extendable
Number of Lift Cylinders - 2, External
Controls - Height/Depth, Raise/Lower, Transport Lock / Position/Draft/Intermix, Maximum Height of Raise, / Rate of Drop, Active Transport
External - Raise and Lower Buttons on Both Rear Fenders
Draft Sensing - Lower Link
Lift Capacity 24 in lb (kg) - 9189 (4168)
Type of Stabilizers - Telescopic
Drawbar Type - Narrow Swing w/Clevis
Maximum Vertical Static Load lbs (kg) - 4420 (2000)

Massey Ferguson 5475 Dimensions

Front Tires - 14.9R24
Rear Tires - 18.4R34
Wheelbase, in (mm) - 109.5 (2780)
Length w/ Front Weights, in (mm) - 167 (4135)
Width at Fenders, in (mm) - 100.4 (2550)
Height to Top of Cab, in (mm) - 108.5 (2755)
Ground Clearance, in (mm) - 15 (390)
2WD Base Weight, lbs (kg) - 9910 (4495)
4WD Base Weight, lbs (kg) - 10527 (4775)