________________________________________________________________________________

Massey Ferguson 7485 Specs

MF 7485 Engine Specifications

Engine Model - Agco Sisu Power 66 CTA
Engine Power, Rated, hp (kW) - 160 (119)
Maximum Engine Power, hp (kW) - 180 (134)
Engine Speed, rpm - 2200
Power Boost, hp (kW) - 20 (15)
Fuel Tank, gal (L) - 93.8 (355)
Cylinders - 6
Displacement, cu in (L) - 403 (6.6)
Engine Bore, in (mm) - 4.25 (108)
Engine Stroke, in (mm) - 4.73 (120)
Block Design, Replaceable Liners - Replaceable wet liners
Aspiration, Turbocharged or Naturally Aspirated - Turbo air to air aftercooled
Fuel System Type - High Pressure Common Rail
Fuel System Control - Electronic
Fuel Injection to combustion chamber - Direct
Emission Level - Tier 3
Exhaust Gas Recirculation - Internal EGR
Exhaust Pipe - Vertical
Cooling System Fan Drive Type - Belt
Electrical System Rating, Volts - 12
Alternator Rating, Amps - 120 Std / 150 Opt

Massey Ferguson 7485 Transmission

Description - Dyna-VT
Transmission Type - Continuously Variable Trans.
Forward / Reverse Speeds - Infinite 2F / 2R
Maximum Speed Forward, mph (kph) - 25 (40)
Creeper Range - Yes, CVT
Shuttle (Forward-Reverse) - Yes

Massey Ferguson 7485 Power Take-Off

PTO Horsepower, hp (kW) - 130 (97)
PTO Speeds, rpm - 540 / 1000 / 540E
PTO Type - Independent

Wheels and Tires

Drive Wheels - 4WD
Steering - Front Steer
Wheelbase 4WD, in (mm) - 118 (2996)
Front Tire Size Width, 4WD - 16.9 R28
Rear Tire Size Width - 18.4 R42

MF 7485 Axles and Brakes

Final Drive - Planetary / Inboard
Axle Output End - Bar
Axle Bar Diameter, in (mm) - 3.74 (95)
Suspended Front Axle Available - Std w/50Kph Trans
Brake Type - Wet Disc

Massey Ferguson 7485 Hydraulic System

Hydraulic System Type - Closed Center PFC
Main Hydraulic Pump Type - Gear Pump
Standard Pump Flow, gpm (Lpm) - 29 (110)
Optional Pump Flow, gpm (Lpm) - 39 (150)
Standard Remote Valves - 3

3-Point Hitch

3-Point Hitch - Category 3
Optional Hitch - Category 3N
Draft Sensing or Lift Control - Lower Link
Draft Link Ends Adjustable - Yes
Standard Lift Capacity 24 Inches behind pin, lb (kg) - 16,140 (7320)
Drawbar Description - Swinging

MF 7485 Dimensions and Weight

Weight (operating) - 15,145 lbs (6869 kg)
Weight (ballasted) - 16,865 lbs (7649 kg)
Wheelbase - 118.4 inches (300 cm)
Length - 205.9 inches (522 cm)
Width - 80 inches (203 cm)
Height - 122 inches (309 cm)
Ground clearance - 14 inches (35 cm)