Bobcat S220 Skid Steer Specifications

The Bobcat S220 skid steer loader is powered by Kubota V3300-TE diesel engine with a rated power of 78 hp (58 kW) or Kubota V3800-DI-TE3 with a rated power of 75 hp (56 kW). The Bobcat S220 is equipped with 1-speed or 2-speed hydro transmission, radial-lift loader boom, 120 HSOC continuous roller chains, and 12x16.5 or 33-15.5x16.5 tires. The hydraulic system has a pump with fluid flow rate of 20.7 gpm (78.4 lpm). The hydraulic pressure is 3300 psi (228 bar). The skid steer has a rated operating capacity of 2200 lbs (998 kg) and tipping load of 4400 lbs (1996 kg). The boom lifting force is 4500 lbs (2045 kg), and bucket breakout force is 5000 lbs (2272 kg).

Kubota V3300 Engine Specs

Engine Model ...................... Kubota V3300-TE
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 203.2 (3.31)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.33 (110.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 78.0 (58.0)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 287 (212.6)
Torque Speed, rpm ...................... 1600
Idle Speed, rpm ...................... 1250-2650
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 25.0 (94.6)
Oil Capacity, qts (L) ...................... 14.0 (13.2)
Coolant Capacity, qts (L) ...................... 17.2 (16.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Kubota V3800 Engine Specs

Engine Model ...................... Kubota V3800-DI-TE3
Engine Type ...................... Vertical four-cylinder liquid-cooled diesel
Number of Cylinders ...................... 4
Displacement, cu.in (L) ...................... 230 (3.77)
Cylinder Bore, in (mm) ...................... 3.94 (100.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 75.0 (56.0)
Rated Engine Speed, rpm ...................... 2400
Maximum Torque, Nm (lb-ft) ...................... 274 (202)
Torque Speed, rpm ...................... 1600
Idle Speed, rpm ...................... 1250-2650
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Air Cleaner Type ...................... Dry replaceable paper cartridge
Fuel Tank Capacity, gal (L) ...................... 23.0 (87.1)
Oil Capacity, qts (L) ...................... 14.0 (13.2)
Coolant Capacity, qts (L) ...................... 17.3 (16.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, 4-wheel drive
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low-high)
Drive Pump Type ...................... Tandem, hydrostatic piston
Chain Drive Type ...................... 120 HSOC continuous roller chain
Brakes Type ...................... Independent wet disc
Tire Size (Std) ...................... 12x16.5
Tire Size (Opt) ...................... 33-15.5x16.5
Chaincase Capacity, qts (L) ...................... 44.0 (41.6)
Travel Speed (Single), mph (km/h) ...................... 6.9 (11.1)
Travel Speed (Low Range), mph (km/h) ...................... 6.9 (11.1)
Travel Speed (High Range), mph (km/h) ...................... 12.0 (19.2)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity (Standard), gpm (Lpm) ...................... 20.7 (78.4)
Pump Capacity (High Flow), gpm (Lpm) ...................... 36.7 (139.0)
System Pressure, psi (Bar) ...................... 3300 (228)
Hydraulic Reservoir Capacity, gal (L) ...................... 4.7 (17.8)
Hydraulic System Capacity, gal (L) ...................... 13.0 (49.2)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2200 (998)
Tipping Load, lbs (kg) ...................... 4400 (1996)
Boom Lifting Force, lbs (kg) ...................... 4500 (2045)
Bucket Breakout Force, lbs (kg) ...................... 5000 (2272)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Wheelbase, in (mm) ...................... 48.3 (1225)
Height (Operator Cab), in (mm) ...................... 80.9 (2055)
Height (Boom Raised), in (mm) ...................... 156.6 (3980)
Length (w/o Bucket), in (mm) ...................... 114.5 (2910)
Length (Bucket On Ground), in (mm) ...................... 142.9 (3630)
Width (w/o Bucket), in (mm) ...................... 72 (1830)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 122.4 (3110)
Dump Angle At Max Height, deg ...................... 41
Dump Height (Fully Raised), in (mm) ...................... 95.4 (2425)
Dump Reach At Max Height, in (mm) ...................... 21.6 (550)
Rollback Angle At Ground Level, deg ...................... 32
Rollback Angle At Max Height, deg ...................... 90
Departure Angle, deg ...................... 25
Bucket Width (Std), in (mm) ...................... 68 (1725)
Bucket Width (Opt), in (mm) ...................... 74 (1880)
Ground Clearance, in (mm) ...................... 8.5 (215)
Turning Radius (w/Bucket), in (mm) ...................... 84.2 (2140)
Shipping Weight, lbs (kg) ...................... 6920 (3145)
Operating Weight, lbs (kg) ...................... 7480 (3395)