Case 95XT Skid Steer Specifications

The Case 95XT skid steer loader is powered by 239 cu.in (3.9L) 4T-390 4-cycle 4-cylinder direct injection turbocharged diesel engine with a rated power of 85 hp (63.4 kW) at 2500 rpm. The Case 95XT is equipped with a two-speed hydrostatic transmission, axial piston drive pumps, vertical-lift boom, and 12x16.5 standard tires. The open center hydraulic system has a pump with fluid flow rate of 22.8 gpm (86.3 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 3150 lbs (1430 kg) and tipping load of 6300 lbs (2860 kg). The lift height is 125.5 inches (3190 mm) to hinge pin, and dump height is 95 inches (2410 mm).

Engine Specs

Engine Model .................. Case 4T-390
Engine Type .................. 4-Stroke direct injection turbocharged diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 239 (3.90)
Engine Bore, in (mm) .................. 4.02 (102.0)
Engine Stroke, in (mm) .................. 4.72 (120.0)
Aspiration .................. Turbocharged
Rated Engine Power, hp (kW) .................. 85.0 (63.4)
Rated Engine Speed, rpm .................. 2500
Maximum Torque, Nm (ft-lb) .................. 324 (239)
Torque Speed, rpm.................. 1500
Compression Ratio .................. 17.0:1
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Governor Type .................. Mechanical flyweight
Lubricating System .................. Positive pressure
Cooling System .................. Pressurized
Air Cleaner Type .................. Dry type
Fuel Tank Capacity, gal (L) .................. 20.2 (76.0)
Oil Capacity, qts (L) .................. 11.0 (10.4)
Coolant Capacity, qts (L) .................. 17.5 (16.5)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 65

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. 2 (Low/High)
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 120HS continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Double-reduction planetary to chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Low), mph (kph) .................. 7.1 (11.4)
Forward Speed (High), mph (kph) .................. 11.1 (17.8)
Reverse Speed (Low), mph (kph) .................. 7.1 (11.4)
Reverse Speed (High), mph (kph) .................. 11.1 (17.8)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow, gpm (Lpm) .................. 22.8 (86.3)
Total Flow, gpm (Lpm) .................. 27.6 (104.5)
System Pressure, Bar (psi) .................. 207 (3000)
Hydraulic Reservoir Capacity, gal (L) .................. 6.9 (26.1)
Hydraulic System Capacity, gal (L) .................. 17.5 (66.3)
Number of Valves .................. 2

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 3150 (1430)
Tipping Load, lbs (kg) .................. 6300 (2860)
Boom Lifting Force, lbs (kg) .................. 5800 (2635)
Bucket Breakout Force, lbs (kg) .................. 6175 (2805)
Loader Boom Type .................. Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) .................. 50.6 (1280)
Height (Operator Cab), in (mm) .................. 80 (2030)
Height (Boom Raised), in (mm) .................. 163 (4140)
Length (w/o Bucket), in (mm) .................. 110.6 (2810)
Length (Bucket On Ground), in (mm) .................. 142.9 (3630)
Width (w/o Bucket), in (mm) .................. 64.5 (1640)
Height to Hinge Pin (Fully Raised), in (mm) .................. 125.5 (3190)
Dump Angle At Max Height, deg .................. 40
Dump Height (Fully Raised), in (mm) .................. 95 (2410)
Dump Reach At Max Height, in (mm) .................. 36.8 (935)
Rollback Angle At Ground Level, deg .................. 27
Rollback Angle At Max Height, deg .................. 94
Departure Angle, deg .................. 28
Bucket Width, in (mm) .................. 82 (2080)
Ground Clearance, in (mm) .................. 9.1 (230)
Turning Radius (w/Bucket), in (mm) .................. 88.4 (2240)
Shipping Weight, lbs (kg) .................. 8100 (3680)
Operating Weight, lbs (kg) .................. 9050 (4110)