Specs, Service, and Problems of Skid Steers and Track Loaders

________________________________________________________________________________

Compact Track Loaders / Gehl Compact Track Loaders / Gehl CTL85

Gehl CTL85 Track Loader Specifications

The Gehl CTL85 compact track loader is powered by 230 cu.in (3.8L) Kubota V3800 DI-T-E3B 4-cylinder direct injection turbocharged diesel engine with a rated power of 91.6 hp (68.3 kW) at 2600 rpm. The Gehl CTL85 is equipped with a 2-speed hydrostatic transmission, planetary final drives, rubber tracks, and wet multi disc brakes. The hydraulic system has a pump with fluid flow rate of 23.4 gpm (88.6 lpm). The hydraulic pressure is 2990 psi (206 bar). The track loader has a rated operating capacity of 2470 lbs (1120 kg) and tipping load of 7055 lbs (3200 kg). The lift height is 126.1 inches (3205 mm) to hinge pin, and dump height is 95.7 inches (2430 mm).

Engine Specs

Engine Model ...................... Kubota V3800 DI-T-E3B
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 230 (3.77)
Cylinder Bore, in (mm) ...................... 3.94 (100.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 91.6 (68.3)
Rated Engine Speed, rpm ...................... 2600
Maximum Torque, Nm (lb-ft) ...................... 291 (393)
Torque Speed, rpm ...................... 1400
Idle Speed, rpm ...................... 2650
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Fuel Tank Capacity, gal (L) ...................... 28.5 (108.0)
Oil Capacity, qts (L) ...................... 14.0 (13.2)
Coolant Capacity, qts (L) ...................... 17.4 (16.5)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 80

Drive Train

Drive System Type ...................... Servo-controlled hydrostatic drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston
Brakes Type ...................... Wet multi disc
Final Drive Capacity, qts (L) ...................... 1.7 (1.6)
Forward Speed (Low range), mph (kph) ...................... 4.8 (7.8)
Reverse Speed (Low range), mph (kph) ...................... 4.8 (7.8)
Forward Speed (High range), mph (kph) ...................... 7.5 (12.0)
Reverse Speed (High range), mph (kph) ...................... 7.5 (12.0)

Undercarriage

Tracks Type ...................... High-strength rubber and steel reinforcement
Track Width, in (mm) ...................... 18 (455)
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 5
Ground Pressure, Bar (psi) ...................... 0.30 (4.35)
Drawbar Pull, lbf (kN) ...................... 13765 (61.2)

Hydraulic System

Hydraulic System Type ...................... Tandem gear pump
Pump Flow (Std), gpm (Lpm) ...................... 23.4 (88.6)
Pump Flow (High), gpm (Lpm) ...................... 40.1 (151.7)
System Pressure, Bar (psi) ...................... 206 (2990)
Hydraulic Reservoir Capacity, gal (L) ...................... 15.9 (60.0)
Hydraulic System Capacity, gal (L) ...................... 25.1 (95.0)

Loader Performance

Rated Operating Capacity, lbs (kg) ...................... 2470 (1120)
Tipping Load, lbs (kg) ...................... 7055 (3200)
Bucket Breakout Force, lbs (kg) ...................... 8670 (3940)
Lift Arm Breakout Force, lbs (kg) ...................... 8547 (3885)

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 123.5 (3135)
Length (Bucket On Ground), in (mm) ...................... 156.9 (3985)
Length (Ground Contact), in (mm) ...................... 63 (1600)
Height (Operator Cab), in (mm) ...................... 91.3 (2320)
Width (w/o Bucket), in (mm) ...................... 73.2 (1860)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 126.1 (3205)
Dump Angle At Max Height, deg ...................... 37
Dump Height (Fully Raised), in (mm) ...................... 95.7 (2430)
Dump Reach At Max Height, in (mm) ...................... 38.8 (985)
Rollback Angle At Ground Level, deg ...................... 30
Departure Angle, deg ...................... 30
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 13.5 (345)
Turning Radius (w/Bucket), in (mm) ...................... 106 (2690)
Operating Weight, lbs (kg) ...................... 11245 (5090)

________________________________________________________________________________

________________________________________________________________________________________

BOBCAT SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

GEHL SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

CASE SKID STEER AND COMPACT TRACK LOADERS

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________