Bobcat T140 Track Loader Specifications

The Bobcat T140 compact track loader driveline system components: Kubota V2203 diesel engine with a rated power of 46 hp (34.3 kW) or Kubota V2403 diesel engine with a rated power of 49 hp (36 kW), and 1-speed transmission. The hydraulic system has a pump with a rated flow of 16.9 gpm (64 lpm). The system pressure is 2750 psi (189 bar). The Bobcat T140 is equipped with a radial-lift loader boom, solid-mounted undercarriage, and 11.8" (300 mm) rubber tracks. The loader has a boom lift force of 2650 lbs (1202 kg) and bucket breakout force of 3500 lbs (1588 kg). The rated operating capacity is 1400 lbs (635 kg), and tipping load is 4044 lbs (1834 kg).

Kubota V2203 Engine Specs

Engine Model ...................... Kubota V2203 M-DI-E2B
Engine Type ...................... Vertical water-cooled 4-cylinder diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 134.1 (2.2)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 3.64 (92.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 46.0 (34.3)
Rated Engine Speed, rpm ...................... 2800
Maximum Torque, Nm (lb-ft) ...................... 140 (105)
Torque Speed, rpm ...................... 1700
Idle Speed, rpm ...................... 1075-3000
Compression Ratio ...................... 22.6:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication with filter
Combustion Chamber ...................... Spherical type (E-TVCS)
Fuel Tank Capacity, gal (L) ...................... 15.4 (50.4)
Oil Capacity, qts (L) ...................... 9.2 (8.7)
Coolant Capacity, qts (L) ...................... 11.2 (10.6)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Kubota V2403 Engine Specs

Engine Model ...................... Kubota V2403-M-DI-E3
Engine Type ...................... 4-cycle vertical direct injection diesel
Number of Cylinders ...................... 4
Total Displacement, cu in (L) ...................... 148.5 (2.43)
Cylinder Bore, in (mm) ...................... 3.43 (87.0)
Piston Stroke, in (mm) ...................... 4.03 (102.4)
Aspiration ...................... Naturally aspirated
Rated Engine Power, hp (kW) ...................... 49.0 (36.0)
Rated Engine Speed, rpm ...................... 2700
Low Idle Speed, rpm ...................... 1220
High Idle Speed, rpm ...................... 2450
Maximum Torque, Nm (lb-ft) ...................... 149 (110)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 23.8:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Common rail direct injection
Fuel System Control ...................... Electronic
Lubricating system ...................... Forced lubrication by pump
Cooling system ...................... Forced circulation with water pump
Emission Level ...................... Interim Tier 4
Fuel Tank Capacity, gal (L) ...................... 15.4 (50.4)
Oil Capacity, qts (L) ...................... 9.5 (9.0)
Coolant Capacity, qts (L) ...................... 12.0 (11.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears ...................... Single
Brakes Type ...................... Independent wet disc
Forward Speed, mph (km/h) ...................... 7.3 (11.8)
Reverse Speed, mph (km/h) ...................... 7.3 (11.8)

Undercarriage

Undercarriage Type ...................... Solid-Mounted
Tracks Type ...................... Rubber tracks, C-Pattern
Tracks Tension ...................... Grease cylinder and spring
Track Width, in (mm) ...................... 11.8 (300)
Ground Pressure, psi (Bar) ...................... 5.0 (0.345)

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Capacity, gpm (Lpm) ...................... 16.9 (64.0)
System Pressure, Bar (psi) ...................... 189 (2750)
Number of Valves ...................... 3
Hydraulic Cylinders ...................... Double-acting
Lift Cylinder Rod Diameter, in (mm) ...................... 1.25 (31.8)
Lift Cylinder Piston Diameter, in (mm) ...................... 2 (50.8)
Lift Cylinder Piston Stroke, in (mm) ...................... 26.6 (675)
Bucket Cylinder Rod Diameter, in (mm) ...................... 1.5 (38.1)
Bucket Cylinder Piston Diameter, in (mm) ...................... 3.5 (89)
Bucket Cylinder Piston Stroke, in (mm) ...................... 14.5 (368)
Hydraulic Reservoir Capacity, gal (L) ...................... 3.5 (13.3)
Hydraulic System Capacity, gal (L) ...................... 6.0 (22.7)

Loader Performance

Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 1400 (635)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 2022 (917)
Tipping Load, lbs (kg) ...................... 4044 (1834)
Boom Lifting Force, lbs (kg) ...................... 2650 (1202)
Bucket Breakout Force, lbs (kg) ...................... 3500 (1588)
Loader Boom Type ...................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 95.8 (2430)
Length (Bucket On Ground), in (mm) ...................... 124.1 (3155)
Length (Ground Contact), in (mm) ...................... 48.4 (1230)
Width (w/o Bucket), in (mm) ...................... 55 (1395)
Operating Height, in (mm) ...................... 143.5 (3645)
Height (Operator Cab), in (mm) ...................... 77.4 (1965)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 109.6 (2785)
Dump Angle At Max Height, deg ...................... 40
Dump Height (Fully Raised), in (mm) ...................... 82.8 (2105)
Dump Reach At Max Height, in (mm) ...................... 25.6 (650)
Rollback Angle At Ground Level, deg ...................... 25
Rollback Angle At Max Height, deg ...................... 96
Departure Angle, deg ...................... 30
Bucket Width, in (mm) ...................... 56 (1420)
Ground Clearance, in (mm) ...................... 7.8 (197)
Turning Radius (w/Bucket), in (mm) ...................... 77.2 (1960)
Operating Weight (V2203 Engine), lbs (kg) ...................... 6435 (2920)
Operating Weight (V2403 Engine), lbs (kg) ...................... 6655 (3020)