Case 85XT Skid Steer Specifications

The Case 85XT skid steer loader is powered by 239 cu.in (3.9L) Case 4-390 4-stroke 4-cylinder direct injection naturally aspirated diesel engine with a rated power of 80 hp (59.7 kW) at 2200 rpm. The Case 85XT is equipped with a hydrostatic transmission, 100HS continuous roller chains, vertical-lift boom, and 12x16.5 standard tires. The open center hydraulic system has a pump with fluid flow rate of 20.3 gpm (77 lpm). The hydraulic pressure is 3000 psi (207 bar). The skid steer loader has a rated operating capacity of 2400 lbs (1090 kg) and tipping load of 4800 lbs (2180 kg). The boom lifting force is 4935 lbs (2245 kg), and bucket breakout force is 6175 lbs (2805 kg).

Engine Specs

Engine Model .................. Case 4-390
Engine Type .................. 4-Stroke direct injection liquid-cooled diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 239 (3.90)
Engine Bore, in (mm) .................. 4.02 (102.0)
Engine Stroke, in (mm) .................. 4.72 (120.0)
Aspiration .................. Naturally aspirated
Rated Engine Power, hp (kW) .................. 80.0 (59.7)
Rated Engine Speed, rpm .................. 2200
Maximum Torque, Nm (ft-lb) .................. 262 (193)
Torque Speed, rpm.................. 1200
Compression Ratio .................. 17.0:1
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Governor Type .................. Mechanical flyweight
Lubricating System .................. Positive pressure
Cooling System .................. Pressurized
Air Cleaner Type .................. Dry type
Fuel Tank Capacity, gal (L) .................. 17.3 (65.5)
Oil Capacity, qts (L) .................. 11.0 (10.4)
Coolant Capacity, qts (L) .................. 17.5 (16.5)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 65

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. Single
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HS continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single-reduction chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 8.0 (7.6)
Forward Speed (Max), mph (kph) .................. 7.6 (12.2)
Reverse Speed (Max), mph (kph) .................. 7.6 (12.2)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow, gpm (Lpm) .................. 20.3 (77.0)
Total Flow, gpm (Lpm) .................. 25.1 (95.0)
System Pressure, Bar (psi) .................. 207 (3000)
Hydraulic Reservoir Capacity, gal (L) .................. 5.7 (21.7)
Hydraulic System Capacity, gal (L) .................. 16.5 (62.4)
Number of Valves .................. 2

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 2400 (1090)
Tipping Load, lbs (kg) .................. 4800 (2180)
Boom Lifting Force, lbs (kg) .................. 4935 (2245)
Bucket Breakout Force, lbs (kg) .................. 6175 (2805)
Loader Boom Type .................. Vertical-lift

Dimensions and Weight

Wheelbase, in (mm) .................. 44.9 (1140)
Height (Operator Cab), in (mm) .................. 80 (2030)
Height (Boom Raised), in (mm) .................. 159.6 (4050)
Length (w/o Bucket), in (mm) .................. 103.1 (2620)
Length (Bucket On Ground), in (mm) .................. 135.5 (3440)
Width (w/o Bucket), in (mm) .................. 59.7 (1510)
Height to Hinge Pin (Fully Raised), in (mm) .................. 122.4 (3110)
Dump Angle At Max Height, deg .................. 40
Dump Height (Fully Raised), in (mm) .................. 92.3 (2340)
Dump Reach At Max Height, in (mm) .................. 39.5 (1000)
Rollback Angle At Ground Level, deg .................. 27
Rollback Angle At Max Height, deg .................. 68
Departure Angle, deg .................. 28
Bucket Width, in (mm) .................. 73 (1850)
Ground Clearance, in (mm) .................. 9.1 (230)
Turning Radius (w/Bucket), in (mm) .................. 83.8 (2130)
Shipping Weight, lbs (kg) .................. 7150 (3250)
Operating Weight, lbs (kg) .................. 8055 (3655)