Case 60XT Skid Steer Specifications

The Case 60XT skid steer loader driveline system components: a 239 cu.in (3.9L) Case 4-390 4-cycle 4-cylinder direct injection diesel engine with a rated power of 75 hp (55.9 kW) and hydrostatic transmission. The hydraulic system has a pump with a rated capacity of 21 gal/min (79.4 l/min). The system relief pressure is 3000 psi (207 bar). The Case 60XT is equipped with a radial-lift boom, 100HS continuous roller chains, and 12x16.5 or 33-15.5x16.5 tires. The skid steer loader has a boom lifting force of 4430 lbs (2015 kg) and bucket breakout force of 5055 lbs (2295 kg). The rated operating capacity is 1800 lbs (817 kg), and tipping load is 3600 lbs (1635 kg).

Engine Specs

Engine Model .................. Case 4-390
Engine Type .................. 4-Stroke direct injection liquid-cooled diesel
Number of Cylinders .................. 4
Displacement, cu in (L) .................. 239 (3.90)
Engine Bore, in (mm) .................. 4.02 (102.0)
Engine Stroke, in (mm) .................. 4.72 (120.0)
Aspiration .................. Naturally aspirated
Rated Engine Power, hp (kW) .................. 75.0 (55.9)
Rated Engine Speed, rpm .................. 2200
Maximum Torque, Nm (ft-lb) .................. 262 (193)
Torque Speed, rpm.................. 1200
Compression Ratio .................. 17.0:1
Firing Order .................. 1-3-4-2
Fuel System .................. Injection pump
Governor Type .................. Mechanical flyweight
Lubricating System .................. Positive pressure
Cooling System .................. Pressurized
Air Cleaner Type .................. Dry type
Fuel Tank Capacity, gal (L) .................. 22.0 (83.3)
Oil Capacity, qts (L) .................. 11.0 (10.4)
Coolant Capacity, qts (L) .................. 17.5 (16.5)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
Alternator Rating, Amps .................. 65

Drive Train

Drive System Type .................. Hydrostatic, 4 wheel drive
Number of Gears .................. Single
Drive Pump Type .................. Tandem, axial piston
Chain Drive Type .................. ASA 100HS continuous roller chain
Brakes Type .................. Independent wet disc
Final Drive Type .................. Single-reduction chain drive
Tire Size (Std) .................. 12x16.5
Tire Size (Opt) .................. 33-15.5x16.5
Chain Case Oil Capacity (per side), qts (L) .................. 6.0 (5.7)
Forward Speed (Max), mph (kph) .................. 7.0 (11.3)
Reverse Speed (Max), mph (kph) .................. 7.0 (11.3)

Hydraulic System

Hydraulic System Type .................. Open center
Hydraulic Pump Type .................. Gear
Pump Flow, gpm (Lpm) .................. 21.0 (79.4)
System Pressure, Bar (psi) .................. 207 (3000)
Hydraulic Reservoir Capacity, gal (L) .................. 7.1 (27.0)
Hydraulic System Capacity, gal (L) .................. 13.3 (50.2)
Number of Valves .................. 2

Loader Performance

Rated Operating Capacity, lbs (kg) .................. 1800 (817)
Tipping Load, lbs (kg) .................. 3600 (1635)
Boom Lifting Force, lbs (kg) .................. 4430 (2015)
Bucket Breakout Force, lbs (kg) .................. 5055 (2295)
Loader Boom Type .................. Radial-lift

Dimensions and Weight

Wheelbase, in (mm) .................. 43.1 (1100)
Height (Operator Cab), in (mm) .................. 76.7 (1950)
Height (Boom Raised), in (mm) .................. 152.8 (3880)
Length (w/o Bucket), in (mm) .................. 103.9 (2640)
Length (Bucket On Ground), in (mm) .................. 127.2 (3230)
Width (w/o Bucket), in (mm) .................. 52.6 (1340)
Height to Hinge Pin (Fully Raised), in (mm) .................. 121.5 (3090)
Dump Angle At Max Height, deg .................. 39
Dump Height (Fully Raised), in (mm) .................. 96.6 (2450)
Dump Reach At Max Height, in (mm) .................. 21.3 (540)
Rollback Angle At Ground Level, deg .................. 32
Rollback Angle At Max Height, deg .................. 84
Departure Angle, deg .................. 28
Bucket Width, in (mm) .................. 66 (1675)
Ground Clearance, in (mm) .................. 9 (230)
Turning Radius (w/Bucket), in (mm) .................. 76.7 (1950)
Shipping Weight, lbs (kg) .................. 5895 (2670)
Operating Weight, lbs (kg) .................. 6560 (2975)