Bobcat T750 Track Loader Specifications

The Bobcat T750 compact track loader is powered by Kubota V3800 diesel engine with a rated power of 85 hp (63 kW) or Bobcat D34 diesel engine with a rated power of 85 hp (63 kW). The Bobcat T750 is equipped with 1-speed or 2-speed hydrostatic transmission, vertical-lift loader boom, solid-mounted undercarriage with 5 triple flange rollers, and rubber tracks. The hydraulic system has a pump with fluid flow rate of 23 gpm (87.1 lpm). The hydraulic pressure is 3550 psi (245 bar). The loader has a rated operating capacity of 3325 lbs (1508 kg) and tipping load of 9500 lbs (4310 kg). The lift height is 132" (3350 mm) to hinge pin, and dump height is 104.3" (2650 mm).

Kubota Engine Specs

Engine Model ...................... Kubota V3800-DI-T-E3
Engine Type ...................... Vertical 4-cylinder liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 230 (3.77)
Cylinder Bore, in (mm) ...................... 3.94 (100.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 85.0 (63.0)
Rated Engine Speed, rpm ...................... 2400
Low Idle Speed, rpm ...................... 1250-1400
High Idle Speed, rpm ...................... 2525-2650
Maximum Torque, Nm (lb-ft) ...................... 290 (215)
Torque Speed, rpm ...................... 1600
Compression Ratio ...................... 19:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Lubricating System ...................... Pressure lubrication by gear pump
Cooling system ...................... Forced circulation with water pump
Air Cleaner Type ...................... Cartridge, dry element
Fuel Tank Capacity, gal (L) ...................... 29.5 (111.6)
Oil Capacity, qts (L) ...................... 12.0 (11.4)
Coolant Capacity, qts (L) ...................... 15.3 (14.4)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 90

Bobcat Doosan Engine Specs

Engine Model ...................... Bobcat Doosan D34
Engine Type ...................... Vertical in-line four-cylinder direct injection liquid-cooled diesel
Number of Cylinders ...................... 4
Displacement, cu.in (L) ...................... 208.1 (3.41)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.45 (113.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 85.0 (63.0)
Rated Engine Speed, rpm ...................... 2400
Low Idle Speed, rpm ...................... 1050
High Idle Speed, rpm ...................... 2500
Maximum Torque, Nm (lb-ft) ...................... 324 (240)
Torque Speed, rpm ...................... 1400
Compression Ratio ...................... 17:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... High-pressure common rail
Fuel Filter Type ...................... Full flow, cartridge
Lubricating System ...................... Pressure lubrication by gear pump
Oil Filter Type ...................... Full flow, cartridge
Engine Control ...................... Full electronic engine management
Fuel Tank Capacity, gal (L) ...................... 27.2 (103.1)
Oil Capacity, qts (L) ...................... 13.3 (12.6)
Coolant Capacity, qts (L) ...................... 14.5 (13.7)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 120

Drive Train

Drive System Type ...................... Fully hydrostatic, rubber track drive
Transmission ...................... Tandem piston pumps and reversing motors
Number of Gears (Std) ...................... Single
Number of Gears (Opt) ...................... Two (low/high)
Brakes Type ...................... Independent wet disc
Drive Motor Oil Capacity, qts (L) ...................... 0.19 (0.18)
Travel Speed (Single), mph (km/h) ...................... 6.6 (10.6)
Travel Speed (Low Range), mph (km/h) ...................... 6.1 (9.8)
Travel Speed (High Range), mph (km/h) ...................... 10.7 (17.2)

Undercarriage

Undercarriage Type ...................... Solid-Mounted
Tracks Type ...................... Rubber tracks
Tracks Tension ...................... Grease cylinder and spring
Track Width (Std), in (mm) ...................... 17.7 (450)
Track Width (Opt), in (mm) ...................... 12.6 (320)
Ground Pressure (17.7" Tracks, psi (Bar) ...................... 4.2 (0.289)
Ground Pressure (12.6" Tracks), psi (Bar) ...................... 5.9 (0.407)
Number of Rollers (per Side) ...................... 5, Triple flange rollers

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Gear
Pump Flow (Std), gpm (Lpm) ...................... 23.0 (87.1)
Pump Flow (Opt), gpm (Lpm) ...................... 36.5 (138.3)
System Pressure, Bar (psi) ...................... 245 (3550)
Hydraulic Cylinders ...................... Double-acting
Hydraulic Reservoir Capacity, gal (L) ...................... 2.6 (9.8)
Hydraulic System Capacity, gal (L) ...................... 9.5 (36.0)
Number of Valves ...................... 3

Loader Performance

Rated Operating Capacity (Solid-Mounted Undercarriage), lbs (kg) ...................... 3325 (1508)
Rated Operating Capacity (Roller Undercarriage), lbs (kg) ...................... 2950 (1338)
Rated Operating Capacity (Steel Track Undercarriage), lbs (kg) ...................... 2850 (1293)
Tipping Load (Solid-Mounted Undercarriage), lbs (kg) ...................... 9500 (4310)
Loader Boom Type ...................... Vertical-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 114.3 (2900)
Length (Bucket On Ground), in (mm) ...................... 141.6 (3595)
Length (Ground Contact), in (mm) ...................... 63.7 (1620)
Width (w/o Bucket), in (mm) ...................... 78 (1980)
Operating Height, in (mm) ...................... 166.5 (4230)
Height (Operator Cab), in (mm) ...................... 81.3 (2065)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 132 (3350)
Dump Angle At Max Height, deg ...................... 42
Dump Height (Fully Raised), in (mm) ...................... 104.3 (2650)
Dump Reach At Max Height, in (mm) ...................... 33.6 (855)
Rollback Angle At Ground Level, deg ...................... 31.5
Rollback Angle At Max Height, deg ...................... 98
Departure Angle, deg ...................... 31.3
Bucket Width, in (mm) ...................... 80 (2030)
Ground Clearance, in (mm) ...................... 8.1 (205)
Turning Radius (w/Bucket), in (mm) ...................... 88 (2235)
Shipping Weight, lbs (kg) ...................... 9560 (4340)
Operating Weight, lbs (kg) ...................... 10325 (4685)