Gehl RT250 Track Loader Specifications

The Gehl RT250 compact track loader is powered by 221 cu.in (3.6L) Deutz TD3.6 L4 vertical inline four-cylinder turbocharged diesel engine with a rated power of 74.3 hp (55.4 kW) at 2300 rpm. The Gehl RT250 is equipped with a two-speed transmission, radial-lift loader boom, 17-tooth drive sprockets, and undercarriage with 17.7" (450 mm) rubber tracks. The hydraulic system has a pump with fluid flow rate of 24.9 gpm (94.3 lpm). The hydraulic pressure is 3000 psi (207 bar). The track loader has a rated operating capacity of 2500 lbs (1135 kg) and tipping load of 7140 lbs (3240 kg). The lift height is 128" (3250 mm) to hinge pin, and dump height is 91.7" (2330 mm).

Engine Specs

Engine Model ...................... Deutz TD3.6 L4
Engine Type ...................... 4-cylinder vertical in-line liquid-cooled diesel
Number of Cylinders ...................... Four
Displacement, cu.in (L) ...................... 221 (3.62)
Cylinder Bore, in (mm) ...................... 3.86 (98.0)
Piston Stroke, in (mm) ...................... 4.72 (120.0)
Aspiration ...................... Turbocharged
Rated Engine Power, hp (kW) ...................... 74.3 (55.4)
Rated Engine Speed, rpm ...................... 2300
High Idle Speed, rpm ...................... 2350
Low Idle Speed, rpm ...................... 1000
Maximum Torque, Nm (lb-ft) ...................... 330 (243)
Torque Speed, rpm ...................... 1500
Compression Ratio ...................... 17.2:1
Firing Order ...................... 1-3-4-2
Fuel System ...................... Direct injection
Fuel Filter Type ...................... Replaceable element
Lubrication System ...................... Forced with oil pump and filter
Cooling System ...................... Liquid-cooled with radiator
Air Cleaner Type ...................... Dry dual element
Emission Level ...................... Final Tier 4
Fuel Tank Capacity, gal (L) ...................... 24.0 (91.0)
Engine Oil Capacity, qts (L) ...................... 9.0 (8.5)
Cooling System Capacity, qts (L) ...................... 20.5 (19.3)
Electrical System Rating, Volts ...................... 12
Charging System ...................... Alternator
Alternator Rating, Amps ...................... 95

Drive Train

Drive System Type ...................... Hydrostatic, rubber track drive
Number of Gears ...................... 2 (low/high)
Drive Motor Type ...................... Axial-piston with planetary gearbox reduction
Brakes Type ...................... Hydraulic disc
Motor Gearbox Capacity, qts (L) ...................... 1.1 (1.0)
Forward Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Forward Speed (High range), mph (kph) ...................... 7.9 (12.7)
Reverse Speed (Low range), mph (kph) ...................... 5.4 (8.7)
Reverse Speed (High range), mph (kph) ...................... 7.9 (12.7)

Undercarriage

Tracks Type ...................... Rubber and steel reinforcement
Track Tension System ...................... Automatic
Track Width, in (mm) ...................... 17.7 (450)
Ground Pressure, Bar (psi) ...................... 0.366 (5.3)
Tractive Effort, lbs (kg) ...................... 14317 (6495)
Drive Sprockets Type ...................... 17-tooth, forged
Track Rollers Type ...................... Steel rollers
Number of Rollers on Each Side ...................... 5

Hydraulic System

Hydraulic System Type ...................... Open center
Hydraulic Pump Type ...................... Axial-piston pump
Pump Capacity (Standard), gpm (Lpm) ...................... 24.9 (94.3)
Pump Capacity (High Flow), gpm (Lpm) ...................... 37.4 (141.6)
System Pressure, Bar (psi) ...................... 207 (3000)
Hydraulic Tank Capacity, gal (L) ...................... 13.8 (52.2)
Hydraulic System Capacity, gal (L) ...................... 21.9 (82.6)

Loader Performance

Rated Operating Capacity (35% tipping load), lbs (kg) ...................... 2500 (1135)
Rated Operating Capacity (50% tipping load), lbs (kg) ...................... 3570 (1620)
Tipping Load, lbs (kg) ...................... 7140 (3240)
Bucket Breakout Force, lbs (kg) ...................... 8384 (3803)
Lift Arm Breakout Force, lbs (kg) ...................... 7437 (3373)
Loader Boom Type .................... Radial-lift

Dimensions and Weight

Length (w/o Bucket), in (mm) ...................... 125 (3175)
Length (Bucket On Ground), in (mm) ...................... 166 (4215)
Length (Ground Contact), in (mm) ...................... 61.5 (1560)
Height (Boom Raised), in (mm) ...................... 175.2 (4450)
Height (Carry Position), in (mm) ...................... 7 (178)
Height (Operator Cab), in (mm) ...................... 83.1 (2110)
Width (w/o Bucket), in (mm) ...................... 69.5 (1765)
Height to Hinge Pin (Fully Raised), in (mm) ...................... 128 (3250)
Dump Angle At Max Height, deg ...................... 41
Dump Height (Fully Raised), in (mm) ...................... 91.7 (2330)
Dump Reach At Max Height, in (mm) ...................... 39.2 (995)
Rollback Angle At Ground Level, deg ...................... 30
Rollback Angle At Max Height, deg ...................... 102
Departure Angle, deg ...................... 25
Bucket Width, in (mm) ...................... 84 (2130)
Ground Clearance, in (mm) ...................... 13 (330)
Turning Radius (w/Bucket), in (mm) ...................... 104.7 (2660)
Shipping Weight, lbs (kg) ...................... 11015 (4995)
Operating Weight, lbs (kg) ...................... 11595 (5260)